jimkeypro Posted October 8, 2017 Share Posted October 8, 2017 Martin, I having issues importing members in my forum, i have done the profile sync and still nothing comes up in the member map. What is your suggestion for this. I can give you access to the ACP if needed to get this resolved. i would like to get all the info in this area in the member map. Link to comment
Pedro Ibáñez Posted October 12, 2017 Share Posted October 12, 2017 Hi, Is this grey wave normal? Link to comment
opentype Posted October 12, 2017 Share Posted October 12, 2017 That “wave” shows where it’s day and where it’s night. ;-) Martin A. 1 Link to comment
Pedro Ibáñez Posted October 12, 2017 Share Posted October 12, 2017 Ah ok thanks opentype! Link to comment
Nathan Explosion Posted October 12, 2017 Share Posted October 12, 2017 19 minutes ago, opentype said: That “wave” shows where it’s day and where it’s night. ;-) Flat-earthers cry out in pain!!! JohnCourt and opentype 2 Link to comment
Unlucky Posted October 18, 2017 Share Posted October 18, 2017 Re this update - Using a built in caching method rather than forcing it to use the file system. This appeared to be an issue with CiC clients. Will file system caching be slower? Link to comment
Martin A. Posted October 18, 2017 Author Share Posted October 18, 2017 8 hours ago, Unlucky said: Re this update - Using a built in caching method rather than forcing it to use the file system. This appeared to be an issue with CiC clients. Will file system caching be slower? Previously it was only using file system, now it will use whatever storage method you've selected in your ACP settings. If you're using a caching engine it will now be stored there too, and should then be loaded faster than before. Link to comment
kysil Posted October 20, 2017 Share Posted October 20, 2017 Hello, how to remove all files of this plugin? Link to comment
Martin A. Posted October 20, 2017 Author Share Posted October 20, 2017 18 minutes ago, kysil said: Hello, how to remove all files of this plugin? Delete /applications/membermap. kysil 1 Link to comment
Dubu Posted October 22, 2017 Share Posted October 22, 2017 (edited) Hello Sorry for my English. Updated the map from 3.3.0 to the current version and noticed a flaw, the search stopped working. Country, city, address. Edited October 22, 2017 by Dubu Link to comment
Martin A. Posted October 22, 2017 Author Share Posted October 22, 2017 (edited) 4 minutes ago, Dubu said: Hello Sorry for my English. Updated the map from 3.3.0 to the current version and noticed a flaw, the search stopped working. Country, city, address. Shouldn't be any changes in that area between version 3.3 and the current. Try running the support tool in the ACP, and clear your browser cache. Edited October 22, 2017 by Martin A. Link to comment
Dubu Posted October 22, 2017 Share Posted October 22, 2017 The result does not give. The search works in English, if in Russian it does not does not even find a city in English. Other countries also find this one time. Link to comment
Martin A. Posted October 22, 2017 Author Share Posted October 22, 2017 What language are you using? You should be able to search for things in your own native language, and the response should also be in a language you understand. Link to comment
Dubu Posted October 24, 2017 Share Posted October 24, 2017 (edited) Russian language. I enter in Russian, there is no result. If you type in Russian the search not working. If you introduce English partially works.... search by address does not work. Edited October 24, 2017 by Dubu Link to comment
Martin A. Posted October 25, 2017 Author Share Posted October 25, 2017 17 hours ago, Dubu said: Russian language. I enter in Russian, there is no result. If you type in Russian the search not working. If you introduce English partially works.... search by address does not work. Version 3.4.4 should fix that. Dubu 1 Link to comment
JohnCourt Posted October 29, 2017 Share Posted October 29, 2017 Good day folks, we are running latest versions both IP and Member Map, seems our members are having issues viewing member map with IE 11. They can view map with Edge, FF, Chrome and others, but not IE11. Any feedback is greatly appreciated, thanks! Link to comment
jmw253 Posted October 30, 2017 Share Posted October 30, 2017 (edited) On 10/8/2017 at 12:11 PM, jimkeypro said: Martin, I having issues importing members in my forum, i have done the profile sync and still nothing comes up in the member map. What is your suggestion for this. I can give you access to the ACP if needed to get this resolved. 5 I'm experiencing the same thing. Profile sync does nada with the existing Location field for members. I'm on the latest versions of IPB + Member Map. Fresh install of the plugin and everything just to rule that out and nada. If I run the task manually it works however. Edited October 31, 2017 by jmw253 Link to comment
LiquidFractal Posted November 2, 2017 Share Posted November 2, 2017 (edited) On 10/30/2017 at 12:28 AM, JohnCourt said: Good day folks, we are running latest versions both IP and Member Map, seems our members are having issues viewing member map with IE 11. They can view map with Edge, FF, Chrome and others, but not IE11. Any feedback is greatly appreciated, thanks! With all due respect, my experience with browsers instantly tells me that the problem is IE. I think it's hands-down the worst browser out there - it routinely has problems with CSS and other code that other browsers have zero problems with. Ideally you want your entire site completely compatible with every browser platform, but as long as Microsoft still insists on creating the web in its own obsolete image via Internet Exploder my advice would be to request your users use a real browser. My two cents. Edited November 2, 2017 by liquidfractal JohnCourt 1 Link to comment
Unlucky Posted November 8, 2017 Share Posted November 8, 2017 Hi Martin, The plugin I have for member map seems to cause this issue with the latest member map when someone tries to start a new topic Fatal error: Call to undefined method IPS\membermap\Application::getJsForMarkerForm() in /var/www/sites/www.net/html/uk/init.php(448) : eval()'d code on line 79 Link to comment
JTHastings Posted November 9, 2017 Share Posted November 9, 2017 Is it just me, I think the auto marker entry shows up in the member statistics as a "Last Post" date stamp (and not a last activity date stamp). Is there a way to prevent this from being flagged as a Last Post? Link to comment
Saurabh Jain Posted November 16, 2017 Share Posted November 16, 2017 I want to showcase various cowshed, schools, manged by a Trust is it possible to have markers based on categories Link to comment
Meddysong Posted November 28, 2017 Share Posted November 28, 2017 This is probably insignificant but I currently have the message Showing 1 markers on my map because language string membermap_showing_markers is Showing <span>0</span> markers rather using the pluralize function and the string Showing {# [1:marker][?:markers]}. It probably doesn't matter because it's unlikely that a map will have only one member for a long period of time but it's there if you're looking for bugs to squish. Link to comment
Martin A. Posted November 28, 2017 Author Share Posted November 28, 2017 On 9.11.2017 at 8:14 PM, JTHastings said: Is it just me, I think the auto marker entry shows up in the member statistics as a "Last Post" date stamp (and not a last activity date stamp). Is there a way to prevent this from being flagged as a Last Post? Where does this show up? A marker will show as a "post", as it is a content item, just like a post, calendar event, downloads file, etc. On 16.11.2017 at 11:25 AM, Saurabh Jain said: I want to showcase various cowshed, schools, manged by a Trust is it possible to have markers based on categories Yes. You can create multiple categories for your markers. 3 hours ago, Meddysong said: This is probably insignificant but I currently have the message Showing 1 markers on my map because language string membermap_showing_markers is Showing <span>0</span> markers rather using the pluralize function and the string Showing {# [1:marker][?:markers]}. It probably doesn't matter because it's unlikely that a map will have only one member for a long period of time but it's there if you're looking for bugs to squish. It's done like that because the number in the <span> is updated dynamically when the map is drawn. Meddysong 1 Link to comment
Nicholas Cole Posted December 2, 2017 Share Posted December 2, 2017 Hi, Following the recent update all of my member markers are white rather than the various member group colours they are set to. I have checked this in the APC and the colours are still set correctly, but the member map is not showing them. They markers are barely visible on the maps now because of this. Can't seem to find a setting to change this. http://www.caymanoc.com/membermap/ Thanks Nick Link to comment
Recommended Posts