I'm waiting on this bug to be fixed, and iAwards to be updated, and then I think I can finally upgrade to 4.5, now 4.5.4.

 

Unfortunately does not work in IPS 4.5.
Today 2 users registered and no post was created, although everything was set and activated.
How can I fix that?

Open: applications/autowelcome/sources/Alerts/Alerts.php

Find:

            $topic->pinned = ( \IPS\Settings::i()->aw_topic_settings && mb_strpos( \IPS\Settings::i()->aw_topic_settings, 'pin' ) !== false ) ? TRUE : FALSE;
            $topic->state  = ( \IPS\Settings::i()->aw_topic_settings && mb_strpos( \IPS\Settings::i()->aw_topic_settings, 'close' ) !== false ) ? 'closed' : 'open';   

Change to:

            $topic->pinned = ( \IPS\Settings::i()->aw_topic_settings && \in_array( 'pin', \IPS\Settings::i()->aw_topic_settings ) ) ? TRUE : FALSE; 
            $topic->state  = ( \IPS\Settings::i()->aw_topic_settings && \in_array( 'close', \IPS\Settings::i()->aw_topic_settings ) ) ? 'closed' : 'open';  

Save, upload & test if it helped.

 

Open: applications/autowelcome/sources/Alerts/Alerts.php

Find:

            $topic->pinned = ( \IPS\Settings::i()->aw_topic_settings && mb_strpos( \IPS\Settings::i()->aw_topic_settings, 'pin' ) !== false ) ? TRUE : FALSE;
            $topic->state  = ( \IPS\Settings::i()->aw_topic_settings && mb_strpos( \IPS\Settings::i()->aw_topic_settings, 'close' ) !== false ) ? 'closed' : 'open';   

Change to:

            $topic->pinned = ( \IPS\Settings::i()->aw_topic_settings && \in_array( 'pin', \IPS\Settings::i()->aw_topic_settings ) ) ? TRUE : FALSE; 
            $topic->state  = ( \IPS\Settings::i()->aw_topic_settings && \in_array( 'close', \IPS\Settings::i()->aw_topic_settings ) ) ? 'closed' : 'open';  

Save, upload & test if it helped.

Should we make those changes in 2.5.6 (ips 4.4) ver or 2.6.1 (ips 4.5)?

4.5.x. But I didnt tested it well so please make backup first. 

 

Open: applications/autowelcome/sources/Alerts/Alerts.php

Superstar as usual @DawPi

I can confirm the edit works and new members are now welcomes again on 4.5.4

Now does anyone know how I can get an active @ tag in a post please as that would make me extremely happy?

 

Now does anyone know how I can get an active @ tag in a post please as that would make me extremely happy?

What you mean?

 

Superstar as usual @DawPi

I can confirm the edit works and new members are now welcomes again on 4.5.4

Now does anyone know how I can get an active @ tag in a post please as that would make me extremely happy?

Just tested and for me works not - no topics, no PM and no email.

Same for me.  I installed it but it's not generating a post.  I'm running the latest version of 4.5.

 

Same for me.  I installed it but it's not generating a post.  I'm running the latest version of 4.5.

Me too - run latest version but i downgrade to ver 2.5.6 and made test - worked fine - created topic and sent PM - email disabled!

Edited October 27, 20204 yr by bosss

How do I downgrade to that version?  

 

How do I downgrade to that version?  

PM sent!

I still can't even install it.

 

I still can't even install it.

Where is problem and which version?

Edited October 27, 20204 yr by bosss

 

Just tested and for me works not - no topics, no PM and no email.

Maybe it depends on what php version you are using?  v7.4.11 Doing a dream here. I commented out the 2 lines it replaced and just pasted in the new entries. I have my topic set to post 1 hour after joining.

 

What you mean?

In my welcome topic, I say

Hello Dawpi, welcome to the site.

I want it to say

Hello @DawPi, welcome to the site

Edited October 27, 20204 yr by optrexnz

 

Maybe it depends on what php version you are using? Doing a dream here. I commented out the 2 lines it replaced and just pasted in the new entries. I have my topic set to post 1 hour after joining.

Tested with php 7.3.1 and 7.4  - works not (with changes).

Downgrade to ver 2.5.6 works fine (posted immediately)

Edited October 27, 20204 yr by bosss

 

Tested with php 7.3.1 and 7.4  - works not (with changes).

Downgrade to ver 2.5.6 works fine (posted immediately)

Thanks much.  Downgrading to 2.5.6 worked for me also.

Edited October 29, 20204 yr by Dknelson

 

How do I downgrade to that version?  

Same question for me.

Thanks.

You will have to remove the new version, get a copy of the old version, and manually install it. 

I've got a new update ready that is just being tested a bit more by a few others and then will be released soon. (Because of the previous update causing problems, I'm a bit more cautious this release.)

These are the changes, if you've got any more bugs to report, please let me know now.

1. Bug fix for validate member.
2. Bug fix with topic settings stopping new welcome alerts.
3. Background queue to convert and then remove the legacy welcome member field.
4. Only members who joined within 2 weeks will receive the time delay welcome.

 

I've got a new update ready that is just being tested a bit more by a few others and then will be released soon. (Because of the previous update causing problems, I'm a bit more cautious this release.)

These are the changes, if you've got any more bugs to report, please let me know now.

1. Bug fix for validate member.
2. Bug fix with topic settings stopping new welcome alerts.
3. Background queue to convert and then remove the legacy welcome member field.
4. Only members who joined within 2 weeks will receive the time delay welcome.

Thank you!!!

The update has been uploaded and is pending approval.

Updated from 2.5.6 and the welcome post still do not work. Uninstalled and gone back to the previous version again mate.

 

Updated from 2.5.6 and the welcome post still do not work

For me, it's work fine now. Thanks @Michael.J.

Thanks for the update @Michael.J, I've tried to update from 2.6.0 to 2.6.2 but still get the following error, even after the manual code change you recommended.

 

Sorry, you do not have permission for that!

1S111/1 Duplicate entry '2' for key 'PRIMARY'