Connections (Support Topic)

[Semenedar]

When Uninstall Connections and install this again, then problem with databasce occur:

 

UPDATE `connections_member_locations` SET `lat`=0 WHERE `lat` IS NULL;

UPDATE `connections_member_locations` SET `lon`=0 WHERE `lon` IS NULL;

ALTER TABLE `connections_member_locations` CHANGE COLUMN `lat` `lat` DECIMAL (10,8) NOT NULL DEFAULT 0 COMMENT 'Latitude', CHANGE COLUMN `lon` `lon` DECIMAL (11,8) NOT NULL DEFAULT 0 COMMENT 'Longitude';

 

Set this nothing changed. After run Support Tools, occured again.

[kmk]

Any posibility use this app to build place or stores directory conection?

[Semenedar]

On 5/23/2020 at 3:59 PM, Semenedar said:

When Uninstall Connections and install this again, then problem with databasce occur:

 

UPDATE `connections_member_locations` SET `lat`=0 WHERE `lat` IS NULL;

UPDATE `connections_member_locations` SET `lon`=0 WHERE `lon` IS NULL;

ALTER TABLE `connections_member_locations` CHANGE COLUMN `lat` `lat` DECIMAL (10,8) NOT NULL DEFAULT 0 COMMENT 'Latitude', CHANGE COLUMN `lon` `lon` DECIMAL (11,8) NOT NULL DEFAULT 0 COMMENT 'Longitude';

 

Set this nothing changed. After run Support Tools, occured again.

Fixed with @Andy Millne

 Thanx 🙂

Edited May 31, 2020 by Semenedar

[Andy Millne]

14 hours ago, kmk said:

Any posibility use this app to build place or stores directory conection?

This is not a feature unfortunately. The app is focussed on connections between users.

[Semenedar]

48 minutes ago, Andy Millne said:

The app is focussed on connections between users

Something with this feature, please? 🙂 🙂

 

[Jordan Miller]

Hi there. This app is creating the following error when enabled:

 

[[Template core/front/profile/profileHeader is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

It occurs when viewing a member's profile while not logged in.

https://www.breatheheavy.com/exhale/index.php?/profile/1-jordan-miller/

I disabled the app and the error disappeared. Just figured I'd pass along. The IPB team helped me pin point this. 🙏 

Edited June 19, 2020 by breatheheavy

[Unlucky]

Hi,

Is it possible to have pagination for connections near you on the bottom of the page as well as the top?

We are still using 4.4 for this site.

many thanks

[Noble~]

will this one get the 4.5 Update?

[SammyS]

38 minutes ago, Noble~ said:

will this one get the 4.5 Update?

x2
Hope this not to be abandoned. Lot of potencial here

[Silnei L Andrade]

I just bought it and went running to install it, but I just realized that it doesn't run on 4.5. 😪 🤦‍♂️

Will version 4.5 come out?

 

[Andy Millne]

I am planning to update this for 4.5 but I'm not sure when exactly it will be available unfortunately. 

[Unlucky]

On 1/8/2021 at 5:45 PM, Andy Millne said:

I am planning to update this for 4.5 but I'm not sure when exactly it will be available unfortunately. 

Any update on your update or can you confirm current version will work with 4.5?

Thanks,

[Steph40]

On 1/8/2021 at 12:45 PM, Andy Millne said:

I am planning to update this for 4.5 but I'm not sure when exactly it will be available unfortunately. 

Looking to buy this but I am in 4.5

is it compatible?

[SammyS]

19 minutes ago, Steph40 said:

Looking to buy this but I am in 4.5

is it compatible?

No. Almost 10 months with no updating, not a very reliable stuff. 

[Andy Millne]

There is a 4.5 compatibility update in review.

[Unlucky]

Hi,

The people near you function is no longer working - it is returning zero results

[Andy Millne]

On 4/12/2021 at 2:15 PM, Unlucky said:

Hi,

The people near you function is no longer working - it is returning zero results

Can you send me a PM with access info so I can investigate this please? I'm not seeing any issues locally.

[Steph40]

@Andy MillneConnections cause an issue with php8, the user hovercard is not showing on hover or click.

[Chris Anderson]

@Andy MillneCould you elaborate further on this setting:

How can one utilize this setting above to its full effect? Some illustrative use cases would be appreciated.

How could one utilize this functionality to be able to increase the value of every match made? If this app was used on this site, would I be matched up with everyone that uses the "Meow" reaction. 

What does that say about my interests? Did I express meaningful interest in this topic? If someone else uses the "Meow" reaction a lot, do we share any meaningful interests?

How do you weigh each reaction to determine if someone shares similar interests considering no two sites are likely to use exactly the same ones?

I don't often react to posts here as there isn't really an appropriate reaction available.  Based on that I would unlikely be well matched up with anyone else here.

Has this app been fully tested to be compatible with PHP8 and 4.6.11?

Edited March 11, 2022 by Chris Anderson

[Andy Millne]

On 3/11/2022 at 2:16 AM, Chris Anderson said:

@Andy MillneCould you elaborate further on this setting:

How can one utilize this setting above to its full effect? Some illustrative use cases would be appreciated.

How could one utilize this functionality to be able to increase the value of every match made? If this app was used on this site, would I be matched up with everyone that uses the "Meow" reaction. 

What does that say about my interests? Did I express meaningful interest in this topic? If someone else uses the "Meow" reaction a lot, do we share any meaningful interests?

How do you weigh each reaction to determine if someone shares similar interests considering no two sites are likely to use exactly the same ones?

I don't often react to posts here as there isn't really an appropriate reaction available.  Based on that I would unlikely be well matched up with anyone else here.

Has this app been fully tested to be compatible with PHP8 and 4.6.11?

It matches cases where multiple users leave positive reputation on the same content. The more content you both like the more the algorithm will weight you as having similar interests.

For example if you and I both like the same five topics we will be more likely to show to each other than someone else that has only liked two of the same topics.

The algorithm does not distinguish between different reaction types. It responds to all positive reactions regardless of the specific reaction given. e.g. you may react with a "like" and I may react with "haha" but as they are both positive interactions then the chance of us sharing similar interests is higher.

[Chris Anderson]

How do I exclude Admin Accounts from showing up as a connection?

 

[Andy Millne]

16 hours ago, Chris Anderson said:

How do I exclude Admin Accounts from showing up as a connection?

 

This isn't currently a feature unfortunately but I will add it to the todo list for feature improvements.

[Chris Anderson]

@Andy Millne It would be nice to be able to exclude certain members from appearing in the Connections app or if that isn't possible at least allow us to exclude members from certain selected groups from being listed in the app. 

If a member adds a location, then they should be able to see how far the other members area in relation to themselves like below:

 

[Chris Anderson]

@Andy MillneCould you please update this app to be compatible with 4.7.

[Andy Millne]

@Chris Anderson I have performed a sweep of this to check for any 4.7 compatibility issues and uploaded a new version. 

Please note this is only for 4.7 compatibility, there are no new features in this release yet.