Magnum Theme [ support topic ]

[TAMAN]

1 minute ago, Dean_ said:

Thank you, I've edited my post and I did it correct. Once again, cheers for the help!

You're welcome  

[Riksa]

Hi @TAMAN 

how can I add a new font, for example. Helvetica Light?

Edited January 29, 2017 by Riksa

[Dean_]

Hi @TAMAN

The social icons (post too - cShareLink cShareLink at the bottom of the page) - Is there a way to duplicate these at the top of the page also?

[TAMAN]

7 hours ago, Riksa said:

Hi @TAMAN 

how can I add a new font, for example. Helvetica Light?

do you have the font on your pc! or somewhere else! ips suite is already using Helvetica font 

6 hours ago, Dean_ said:

Hi @TAMAN

The social icons (post too - cShareLink cShareLink at the bottom of the page) - Is there a way to duplicate these at the top of the page also?

requires html editing, i can help just specify where you want exactly 

[Riksa]

15 hours ago, TAMAN said:

do you have the font on your pc! or somewhere else! ips suite is already using Helvetica font 

requires html editing, i can help just specify where you want exactly 

Hi @TAMAN

thanks for the answer. Could put Helvetica Light sub-lists?
How can I determine the size of the font?

[dunefreak]

Just dropping in to say keep up the great work, TAMAN! You've been a great help. 

[TAMAN]

7 hours ago, Riksa said:

Hi @TAMAN

thanks for the answer. Could put Helvetica Light sub-lists?
How can I determine the size of the font?

Which font exactly? body? 

body{
	font-size: 13px;
}

 

---------

59 minutes ago, dunefreak said:

Just dropping in to say keep up the great work, TAMAN! You've been a great help. 

Thank you  

[TAMAN]

Version 2.0.1  

Support for IPS 4.1.18 + Minor bug fixes 

[SammyS]

After uploading new IPB and magnum versions navbar icons went missing. I was using these code, do I have to change something?

 

.ipsNavBar_primary > ul > li[nav_title="FORO"] > a:before {
    content: "\f086"!important;
}

 

[TAMAN]

25 minutes ago, SammyS said:

After uploading new IPB and magnum versions navbar icons went missing. I was using these code, do I have to change something?

 

.ipsNavBar_primary > ul > li[nav_title="FORO"] > a:before {
    content: "\f086"!important;
}

 

Use data-navTitle instead of nav_title  

.ipsNavBar_primary > ul > li[data-navTitle="FORO"] > a:before {
    content: "\f086"!important;
}

Edited January 31, 2017 by TAMAN

[SammyS]

2 hours ago, TAMAN said:

Use data-navTitle instead of nav_title  

.ipsNavBar_primary > ul > li[data-navTitle="FORO"] > a:before {
    content: "\f086"!important;
}

Thanks, mate

 

[CP_User]

Taman - Is there a way to make a full screen slider landing page? But still have the slider on (but not full screen) when navigating the forums?

[TAMAN]

1 hour ago, CP_User said:

Taman - Is there a way to make a full screen slider landing page? But still have the slider on (but not full screen) when navigating the forums?

mmm nope, sorry  

[MikuruX]

First off I wanted to say that I'm enjoying the new update. Thanks a bunches!

 

There are just 2 things I wanted to get help with:

1.) Seems my articles don't show up in the slider no more after the update

 

& 

 

2.) Is there any possible way to center the spot where the advertisements show on the theme and also on the footer ad (not shown on my site), is there a way to move it from its current location to right below the image slider at the bottom of my page (after the section where you add other functions where the image gallery slider is currently at)?

[TAMAN]

16 minutes ago, Mikuru // X said:

First off I wanted to say that I'm enjoying the new update. Thanks a bunches!

 

There are just 2 things I wanted to get help with:

1.) Seems my articles don't show up in the slider no more after the update

 

& 

 

2.) Is there any possible way to center the spot where the advertisements show on the theme and also on the footer ad (not shown on my site), is there a way to move it from its current location to right below the image slider at the bottom of my page (after the section where you add other functions where the image gallery slider is currently at)?

1. make sure the block template key hasn't changed, if its same try to disable the articles in theme settings then save, and then re enable to see if it works 

2. If you show me screenshot where you want to appear i can help  

[MikuruX]

As for the advertising spots:
 

On this one, the spots are just fine for both but I would just like them to be centered.

On this one, the current advertisement will show up in the footer below where the arrow is pointing inside or around in the "about" section. I'm trying to get it to where the arrow is pointing at with the box highlighting where it would be (if it's possible).

 

As for my current articles showing up in the slider, I've had no luck thus far with turning the slider off and on.

[TAMAN]

In globalTemplate find

{advertisement="ad_global_footer"}

Copy the line and remove it from its current place 

 

Then add it inside ipsLayout_mainArea at the end

Now In ACP > System > Advertisements, Select "Just above the page footer"  option for your Advertisements

To make it centered, try to wrap your advertsment in a div with  align="center"

example 

<div align="center">
  your advertsment code
</div>

 

 

[Foolboy]

Hello TAMAN,

On the recent updates, I found that line truncate option on the article slider did not work for unknown reason. The previous theme version (2.0.0) works fine. I even tried to delete and freshly install the current theme version and also its pages_templates.xml with no success. Please help.

[TAMAN]

19 minutes ago, Foolboy said:

Hello TAMAN,

On the recent updates, I found that line truncate option on the article slider did not work for unknown reason. The previous theme version (2.0.0) works fine. I even tried to delete and freshly install the current theme version and also its pages_templates.xml with no success. Please help.

I will fix it on next update 

Quick fix for you

go to ACP > Pages > Template > Block Plugin Templates > RecordFeed > Pages_Slider 

In pages_slider template find slider_article_truncatecontent replace with slider_article_content_truncate

 

Edited February 2, 2017 by TAMAN

[Foolboy]

1 hour ago, TAMAN said:

I will fix it on next update 

Quick fix for you

 

It works! Thanks for your quick help!

[Yurri]

Hello. Thanks for cool skin. vv. 2.0.0 - 2.0.1.

One small problem in IE11-12 witn navbar align. Have a quick fix?

Edited February 3, 2017 by Yurri

[TAMAN]

3 hours ago, Yurri said:

Hello. Thanks for cool skin. vv. 2.0.0 - 2.0.1.

One small problem in IE11-12 witn navbar align. Have a quick fix?

Update to version 2.0.2  thanks

 

---------

 

On 2/2/2017 at 6:19 PM, Foolboy said:

Hello TAMAN,

On the recent updates, I found that line truncate option on the article slider did not work for unknown reason. The previous theme version (2.0.0) works fine. I even tried to delete and freshly install the current theme version and also its pages_templates.xml with no success. Please help.

 

update to latest version and undo the quick fix. 

[Yurri]

Ok. Thank you!

[CP_User]

On 20/12/2016 at 6:43 PM, TAMAN said:

background-image: url('#') !important;
background-repeat: repeat !important;

 

Hi @TAMAN - wondering if I could bother you for an update to the above code?

I'm looking to have an image aligned Left | Center | Right

I'd like the left and right images to not repeat but the middle image to repeat so it stretches to the width of the title bar.
 

background-image: url('http://#') !important;
background-position: left;
background-repeat: no-repeat; !important;

Then for the Center

background-image: url('http://#') !important;
background-position: center;
background-repeat: repeat; !important;

And finally for the right side

background-image: url('http://#') !important;
background-position: right;
background-repeat: no-repeat; !important;

All on one title bar - Thanks!

[TAMAN]

1 hour ago, CP_User said:

Hi @TAMAN - wondering if I could bother you for an update to the above code?

I'm looking to have an image aligned Left | Center | Right

I'd like the left and right images to not repeat but the middle image to repeat so it stretches to the width of the title bar.
 

background-image: url('http://#') !important;
background-position: left;
background-repeat: no-repeat; !important;

Then for the Center

background-image: url('http://#') !important;
background-position: center;
background-repeat: repeat; !important;

And finally for the right side

background-image: url('http://#') !important;
background-position: right;
background-repeat: no-repeat; !important;

All on one title bar - Thanks!

Hi!

separate the properties by comma 

example

background-image: url('left image'), url('center image'), url('right image') !important;
background-position: left top, center center, right top;
background-repeat: no-repeat, repeat, no-repeat !important;

 

Edited February 8, 2017 by TAMAN