Adriano Faria Posted January 31, 2016 Author Posted January 31, 2016 7 hours ago, Eric Smeets said: Works flawlessly for me, thank you Adriano! Thank you for the feedback.
Lenny Warren Posted April 9, 2016 Posted April 9, 2016 Hi @Adriano Faria, I've installed this on my 4.1.10 and it doesn't seem to work for me. Set it up, have a member waiting to be validated but nothing shows up on my block on my page. I've cleared my cache, still no joy.
Adriano Faria Posted April 9, 2016 Author Posted April 9, 2016 30 minutes ago, Lenny Warren said: Hi @Adriano Faria, I've installed this on my 4.1.10 and it doesn't seem to work for me. Set it up, have a member waiting to be validated but nothing shows up on my block on my page. Administrator validation or Email and administrator validation, right? User validation won't show there. I validated a member on my board a few minutes ago. I use 4.1.10.
Lenny Warren Posted April 9, 2016 Posted April 9, 2016 I'm set to Email and administrator validation, setup a new test member, validated by email. It's waiting in ACP for admin approval, but doesn't show on my forum page. ( I set the block on my main page)
Adriano Faria Posted April 9, 2016 Author Posted April 9, 2016 I'll take a look tomorrow in the morning.
Adriano Faria Posted April 10, 2016 Author Posted April 10, 2016 14 hours ago, Lenny Warren said: Hi @Adriano Faria, I've installed this on my 4.1.10 and it doesn't seem to work for me. Set it up, have a member waiting to be validated but nothing shows up on my block on my page. I've cleared my cache, still no joy. 13 hours ago, Lenny Warren said: I'm set to Email and administrator validation, setup a new test member, validated by email. It's waiting in ACP for admin approval, but doesn't show on my forum page. ( I set the block on my main page) I see the problem. This widget is made to work only on horizontal mode (top or bottom of the page), not in sidebar. It's too much information to show there. When you move it to a right place, it works: I will edit the description to add this information. Lenny Warren 1
Lenny Warren Posted April 10, 2016 Posted April 10, 2016 Gotcha, makes sense, many thanks @Adriano Faria. Adriano Faria 1
z3n Posted May 21, 2016 Posted May 21, 2016 Would it be possible to change it from "Approve or Ban" to "Approve or Delete". I would prefer to just delete the account if my admins can't contact member to begin the joining process, and sometimes people just go afk. I want them to be able to register again in the case that we delete their registration.
Pupper Puppet Posted October 8, 2016 Posted October 8, 2016 Hello @Adriano Faria! Thank you for this fantastic plugin! I installed it as a surprise for the admins in my forum - version 4.1.15 - and they loved it. I left it at the default setting, which should have restricted viewing or modifying it to those with unrestricted access to the ACP (though I may be misunderstanding that). As soon as a couple of members registered, though, I was notified that both moderators and members could see the widget - including the IP and email addresses for our new members. When they clicked on anything, they were told they didn't have access to use that feature, but I can't have mods or members being able to see that private information. Because of that, I wanted to ask you if this issue would be fixed if I were to change the setting to allow only those in the root admin group to use the widget. Essentially, I need to make sure that only the admins can see it, never mind using it. Could you let me know? Thanks! -Dev
Adriano Faria Posted October 8, 2016 Author Posted October 8, 2016 1 minute ago, Dev @ LP said: Hello @Adriano Faria! Thank you for this fantastic plugin! I installed it as a surprise for the admins in my forum - version 4.1.15 - and they loved it. I left it at the default setting, which should have restricted viewing or modifying it to those with unrestricted access to the ACP (though I may be misunderstanding that). As soon as a couple of members registered, though, I was notified that both moderators and members could see the widget - including the IP and email addresses for our new members. When they clicked on anything, they were told they didn't have access to use that feature, but I can't have mods or members being able to see that private information. Because of that, I wanted to ask you if this issue would be fixed if I were to change the setting to allow only those in the root admin group to use the widget. Essentially, I need to make sure that only the admins can see it, never mind using it. Could you let me know? Thanks! -Dev You mean people without permission are viewing the widget?
Pupper Puppet Posted October 11, 2016 Posted October 11, 2016 On 10/8/2016 at 3:49 PM, Adriano Faria said: You mean people without permission are viewing the widget? Yes, exactly. It's set to allow only those with full access to the ACP to view it, but I was notified by both a member and a moderator that they could see it. The member who reported it included a screen grab to show us what she was seeing.
Pupper Puppet Posted October 18, 2016 Posted October 18, 2016 Good evening @Adriano Faria! Just wanted to follow up and see if you've had time to poke at this. Thanks! -Dev
Adriano Faria Posted October 19, 2016 Author Posted October 19, 2016 (edited) On 18/10/2016 at 2:03 AM, Dev @ LP said: Just wanted to follow up and see if you've had time to poke at this. Just sent you a version via PM. Please test it and let me know if it's ok so I can update the file here on IPS. Tks. Nvm. Just tested and it still shows. So I removed the ADMIN option and leave only the group selection: That fixes the whole issue. Just select your group and you're done. Edited October 19, 2016 by Adriano Faria
Adriano Faria Posted October 19, 2016 Author Posted October 19, 2016 What's New in Version 3.1.1: Changed the permission to group only
Dean_ Posted October 19, 2016 Posted October 19, 2016 Are you able to have this work for members who haven't validated, staff can then have delete/ban or validate account as an extra option?
Adriano Faria Posted October 19, 2016 Author Posted October 19, 2016 Nope... This is the same from ACP; the only difference is that this is used on front end.
Pupper Puppet Posted October 19, 2016 Posted October 19, 2016 @Adriano Faria - thanks for the fast update! It's worth mentioning that I tested the version you sent in PM with various user groups and found it worked as intended - only those of us with ACP access were able to see the widget. That being said, I can also confirm that v3.1.1 works like a charm as well! Thanks again! Adriano Faria 1
marklcfc Posted October 19, 2016 Posted October 19, 2016 I've installed the latest version and it didn't validate as it used to. Previously it would work without a page refresh, this time it redirected me to a blank page and appeared to be an error, but then it directed me back to the board index and the member appears to be validated.
Adriano Faria Posted October 19, 2016 Author Posted October 19, 2016 Can you uninstall it and reinstall it? Nothing was done regarding this. I simply removed a widget setting. I'll check again tomorow.
Adriano Faria Posted October 19, 2016 Author Posted October 19, 2016 Just now, marklcfc said: Ok will do that Let me know when you have another validating member. Also make a hard refresh (Ctrl+F5) to update cache, JS, etc.
marklcfc Posted October 20, 2016 Posted October 20, 2016 Having reinstalled and done the hard refresh, after validating a member today I didn't receive a redirect but I received this pop up After clicking ok, the validating member part was green and the member appears validated. But these errors didn't happen previously.
Recommended Posts