raza ali

We are working hard to get Invision Community 4.2 ready to go! If you have not been following this upcoming version, check out the details:
Over the last month we have released several beta versions and feedback from those that have chosen to jump in on the beta has been great. We really could not be happier. Feedback has included amazement over how stable the beta is to reactions from community members enjoying all the new features.
Everyone here at IPS is very excited to get the full release out so everyone can enjoy it. Not everyone is comfortable using beta releases .
Back in March when we first announced 4.2 was coming soon we said that it would be out in mid-2017 and we are still on track for that. Be sure to keep an eye on announcements for the full release expected in the next 3 - 4 weeks.
We really hope everyone is as excited as we are about 4.2's full release. Based on the feedback from those already using 4.2 beta on their live sites we really think this will be a huge hit with your community.
 

This is an entry about our IPS Community Suite 4.2 release.
The ability to automatically promote users from one group to another based on set parameters has been a staple of community software for some time. Traditionally, the most common determination of promotion has been post count. Additionally, the 4.x Community Suite supports promoting members automatically based on the time elapsed since the user joined the site and based on their total reputation count.
With 4.2, we have completely overhauled and enhanced the group promotion feature bringing many new options to administrators looking to promote members through different group levels.
To start with, the group promotion options have been removed from the groups configuration pages into their own area.

Group promotion rules overview page
You will notice that rules are no longer strictly tied to a single group, and that rules can be sorted however you desire. When you create and edit rules, you can choose which groups the rule applies to, what parameters the user needs to meet in order for the rule to be activated, and then finally, which primary and secondary groups the user will be moved in to. You can also configure the rule to remove specified secondary groups, which can be useful if one rule adds a secondary group for users, and then the next rule should change them to be part of a different secondary group (i.e. add a new secondary group, but also remove the previously awarded secondary group).
The system uses the same member filters available when configuring bulk mail, and we have made some updates to the member filters area (and have introduced some new filters) in this release as well. For example, you can create a rule that only applies to members who have won the daily leaderboard at least once, or members who have created a blog.

Some of the group promotion filters, which are also available when sending bulk mails
Any time a member account is updated for any reason (a new visit, editing the member, the member makes a new post, etc.), the software will loop through all configured rules and the last rule in the list that matches the member will be applied. This approach allows you to create promotion levels, for instance when a member reaches 100 posted content items they will be promoted to a new group, and when they reach 1000 posted content items they will be promoted to yet a different new group.
Groups can be wholly excluded from any promotion rules, which is useful when you have administrator and/or moderator groups and you want to ensure that they are never moved to a different group. These groups will be disabled from selection when configuring group promotion rules, and these groups will be ignored if "any group" is selected for a promotion rule.
Finally, if a user is moved to a new primary group by Commerce because they have purchased a product which moves them to a new group, they will also be excluded from group promotion rules (however, Commerce purchases that only adjust secondary groups will not exclude users from being checked by group promotion rules).
 
Developer note: You can add your own filters for group promotion rules (and bulk mails) by adding MemberFilter extensions in 4.2, available in the Developer Center for your application.

This entry is about our IPS Community Suite 4.2 release
In IPS Community Suite 4.2 we have added some additional customization options for Blogs
The sidebar now features a space reserved for Blog owners to add a little further info, add links to social network sites, contact info, or anything at all they desire.

The New Blog Sidebar
The sidebar will show across all of the Blog pages (unlike the Blog description) and uses the standard built in text editor which supports all of the usual features such as embeds, images, links, and all other editor plugins you have enabled.
Editing the sidebar is as easy as editing the Blog info via the Manage Blog menu. It's then a simple matter of toggling the sidebar on and entering the info.

Editing The Sidebar
The Blog sidebar content is controlled by the owner of the Blog and is only available if the administrator activates the option. If set, the content shows above any other widgets placed in the sidebar.
This has been a frequently requested change and we are happy to add this to make Blogs more individual and engaging.
 

This entry is about our IPS Community Suite 4.2 release
In IPS Community Suite 4.2 we have added a bunch of new settings for the Downloads Index Page.
 

Downloads Index Page - Settings
With 4.2 you'll be able to hide any of the boxes. 

Hidden Most Downloads Box
 
Another often requested feature was that people want to be able to choose the categories from where the files should be fetched
This way you'll be able to hide files from some very old categories.

Hidden Categories

This is an entry about our IPS Community Suite 4.2 release
We have introduced a feature which will allow moderators, with permission, to copy topics from the Forums application, into any custom database in the Pages application.

New Moderation Item
This feature will copy the contents of the first post of a topic, and copy it as the body of the new record. The moderator copying the topic will then be given a pre-populated form which will have the Title and Content fields automatically filled with the topic title and first post contents, which then can be modified to add any additional notes (such as an editors note at the bottom). The form will also include any custom fields that can be filled in, as well as all moderation options you would normally see when creating a record.

Form Input
In addition to all of the normal options you would typically see, there are two additional options. The first is the ability to copy all posts in the topic as comments on the new record. The second is the ability to post the record as the original topic author, or as the moderator copying the topic.
This new feature is very useful when you might see a topic in the forums that you want to copy to an article or keep in a permanent knowledge base.
 

This is an entry about our IPS Community Suite 4.2 release
Statistics can be an important part of monitoring your site and ensuring it grows and responds to your marketing and promotion efforts effectively, and several new statistic tools have been added to the 4.2 Community Suite which we know you will be excited to learn about!
A simple tool has been added that will allow you to look up and list all member accounts that have last visited the site within a specified time period.

Look up members who have visited within a set time period
Additionally, online user (both logged in user and guest) counts are now tracked every 15 minutes and graphed in the AdminCP for you to reference. You can view online user trends over a specified date period, view just guest counts or just member counts (or both), and view the graph in multiple different modes (such as an area chart or as a column chart). By default, the data is retained for 180 days, however you can control how often to prune this statistical data in the AdminCP.

Online user trends graphed
You can also view a graph of member activity on the site. Member activity is defined as any "activity" beyond simply browsing, such as submitting a new post, reacting to any content item or comment, or following any content item or node.

Activity information about your member base
You will also be able to define keywords that you would like to monitor and then see both a graph of usage of those keywords, as well as a table listing all usages of those keywords. You can use this to track usage of competitor names, find out if hash tags you define are trending, or learn if promotional materials are making an impact on your membership.

Keyword tracking can help you closely monitor your community
Along with these additions, we've cleaned up the menu and wording for the rest of the existing statistic options to make their functions more clear.
We hope these additions help you better track and control your community, making the most of your time and money.
 
Note for developers: A new chart class has been added which allows you to populate dynamic charts using callbacks, in addition to the standard methods that already exist for pulling data directly from a specified database table.

This is an entry about our IPS Community Suite 4.2 release
We are happy to introduce several changes to our Gallery application to both refine the existing capabilities and to introduce new useful functionality; particularly for Albums.
We have clarified how to submit images directly to a category on the first step of the upload form in Gallery.

Clarification for submitting directly to a category
When submitting images to the Gallery, a simple "Add more images" button has been added to the wizard. While it has always been possible to add more images by dragging and dropping them on to the upload area, or by clicking the "Choose files" button again, the addition of this button should help add some clarity for users who overlooked these capabilities.

A new "Add more images" button makes adding additional images easier
Applying the same details to all of the images you are submitting has been made much simpler. When you begin entering the details for the first image, you can specify a template to use for the caption name leveraging a special replacement "%n". A small help icon next to the caption field label explains how to use this capability. When you are done supplying the details, you can click "Copy details to all images" and your submission will start instantly, using all of the details supplied for the image you are editing. You can quickly set tags, an image description and a caption name template (for instance "Aquarium %n") to all images using this new capability, useful when submitting 50+ images at once. Of course, you can still supply the details for each individual image as well, if you wish.

Submitting a lot of images at once has been made easier
In addition to improvements for submitting images, albums have been updated to include many new features, including:
Commenting Reviews Reactions Messages Featuring Hiding Locking Reporting Searching A new Gallery widget (sidebar block) to show albums anywhere throughout the Community Suite has been added as well.

Album overview page
Going along with these changes, we've improved how groups of images that are submitted to an album are handled in searches. If you submit multiple images to an album, you will only see the album listed in activity streams, and similarly if you follow a bunch of images in an album these are grouped as well, making activity streams more useful and easier to follow.

Activity streams have been updated as well
The changes to albums and image submissions will simplify your users' interaction with Gallery in 4.2, and make submitting images and new albums, and working with those albums more useful and robust.

This is an entry about our IPS Community Suite 4.2 release and features content specifically aimed towards developers. If you are not interested in developing for 4.2 you may wish to skip this entry. Don't worry we still have lots of exciting core feature announcements still to come. 
We are expanding on the already available REST API endpoints to include more support for nodes. This significantly increases the flexibility of the API and now allows forums, downloads categories, calendars etc. to be created programmatically via external sources.
 As is usual with the existing content item endpoints, access for nodes is configured via the admin control panel for each API key that is generated.

Configuring API Permissions via the Admin Control Panel
For those new to the REST API, documentation can be found in the developer resources section and within the admin control panel.

Endpoint Documentation
New endpoints in 4.2 include;
GET /core/groups - Get a list of groups GET /core/groups/{id} - Get information about a specific group DELETE /core/groups/{id} - Delete a group GET /forums/forums - Get a list of forums GET /forums/forums/{id} - Get information about a specific forum POST /forums/forums - Create a forum POST /forums/forums/{id} - Edit a forum DELETE /forums/forums/{id} - Delete a forum DELETE /blog/blogs/{id} - Delete a blog GET /calendar/calendar - Get a list of calendars GET /calendar/calendar/{id} - Get information about a specific calendar POST /calendar/calendar - Create a calendar POST /calendar/calendar/{id} - Edit a calendar DELETE /calendar/calendar/{id} - Delete a calendar GET /downloads/category - Get a list of downloads categories GET /downloads/category/{id} - Get information about a specific category POST /downloads/category - Create a category POST /downloads/category/{id} - Edit a category DELETE /downloads/category/{id} - Delete a category We are continuously looking for ways to improve developer functionality so if you have any ideas for additional endpoints or suggestions for improved documentation please feel free to share them in the comments below.
We are really looking forward to seeing the new and imaginative ideas 3rd party developers can create using these additional capabilities.
 

This entry is about our IPS Community Suite 4.2 release
 
Improved Stripe Integration
Stripe is a popular payment gateway that supports card payments. In IPS Community Suite 4.2 we have made some improvements to our integration:
When viewing a transaction in the AdminCP, it will show the last 4 digits of the card used, and the result of Stripe's risk evaluation. More information is sent to Stripe for easier cross-reference between Stripe's control panel and your AdminCP. This includes the customer's name, billing and shipping addresses, email address, associated transaction/invoice/customer IDs, and the invoice title.  

Stripe Transaction in the AdminCP showing risk evaluation and card details

Transaction in Stripe's control panel showing customer and invoice details
 
Anti-Fraud Improvements
Anti-Fraud Rules now have some additional filters:
Products being purchases includes... Account was registered more/less than [x days] ago Customer is/isn't in group Customer has previously spent more/less than Time since last purchase is more/less than [x days] ago Custom profile fields (both at member and customer level) IP address is x (exactly, contains or matches regular expression) Customer has previously made transactions that failed (opposed to "were blocked by fraud rules") Email address matches regular expression
Some of the new Anti-Fraud Rule options
 
MaxMind per gateway
A new setting has been added that allows you to run MaxMind only against transactions using particular payment gateways.

New MaxMind gateways setting
 
Transaction Search
You can now enter the transaction ID provided by the payment gateway in the AdminCP search box to find a transaction.

Looking up a transaction by gateway ID
 
Renewal Savings
If you have a product with multiple renewal terms, a new setting allows you to show alongside each option how much is saved. This can be shown either as a monetary value, or as a percentage.

Product showing savings for different renewal options

This entry is about our IPS Community Suite 4.2 release
In 4.1.18 we added Two Factor Authentication. Already in 4.2 we have announced a new setting to trigger 2FA when logging in from a new device, and in 4.2 we are also adding Authy as an authentication handler.
Authy can send a user a text message, make a phone call, or send a push notification to a smartphone app to authenticate the user. You can enable whichever of these options you like.
 
Set Up
To set up Two Factor Authentication with Authy, the user will enter their phone number. To verify their phone number they will then enter a code shown in the Auhy app or have a code sent by text message or phone call. The system will automatically show an appropriate interface based on what options you have enabled - for example, if you don't want to enable the app as an option, it will not reference Authy.

Setting up Authy with the app available as an option

Setting up Authy with just phone or text message options enabled
 
Verification with Authy
When the user needs to verify their account, the system will automatically show an appropriate interface. If you allow verification with the Authy app and either it is the only option you allow, or the system knows that the user has installed the Authy app, the system will prompt them to use the app. This can either be done using Authy's OneTouch option (where the user will receive a push notification to the app, and when they click approve, the screen will automatically refresh) or their SoftToken option (where the user will be instructed to open the Authy app and enter the code they see). If you allow authentication by text message and/or phone call as well, the user will also see options for using those instead.
These screenshots show the process for OneTouch authentication:

The user is shown a waiting screen
 
Simultaneously they will receive a push notification and when opening it be able to approve
Once the user has approved, the waiting screen will automatically refresh with the user authenticated.
For SoftToken authentication, the user is prompted to enter the code shown in the Authy app:

Authy SoftToken option
 
Phone Verification
If you have disabled the Authy app as an option, or the user does not have it installed, they will be prompted to choose from the available options how they want to authenticate.
These screenshots show the process for authenticating by text message:

The user is asked how they want to authenticate

The user receives a text message or phone call with a code

The user enters this code to authenticate
 
Management
If the user changes their phone number they can reconfigure the system in their account settings. The system automatically shows "Phone Verification" rather then "Authy" if the app is not available as an option.

Account Settings showing Authy as Phone Verification
 

This entry is about our IPS Community Suite 4.2 release
IPS Community Suite has supported drag and drop uploading to the attachments area at the bottom of the editor since 4.0. In 4.2 we're pleased to add the ability to drag and drop right into the editor, so you can drop your attachment exactly where you want it to show without having to add it afterwards.

Drag and drop into editor
If your browser and OS supports it you can also copy and paste, either from the desktop or from other content on the web:

Copy and Paste
Naturally this works for ordinary files as well as images:

Drag and drop a file
 

This is an entry about our IPS Community Suite 4.2 release
In previous versions of IPS Community Suite we have had an account history feature in our Commerce application. This feature showed many important actions that may be relevant to the customer such as when an invoice was generated or when a customer changed their account details.
In IPS Community Suite 4.2 we have expanded this functionality and moved it into the core functionality of the suite.

Member History Member Overview
Member actions that will be logged include (but are not limited to)
Email address change Display name change Password change Account merge Primary group change (The reason will be shown when triggered by an automatic group promotion) Secondary group change Flagged/Unflagged as spammer Multi-Factor Authentication (Enable / Disable / Opt-out) Social media (Twitter, Linked In, Facebook, Google, Twitter, IPS Connect) for enabling, disabling and which (if any) were used to register an account. The Commerce customer account page will now show actions that may be related with a transaction or account.

Member History on the Commerce customer view
Discoverability
Each action is also discoverable via the IP Address tools built into IPS Community Suite 4

Member History in IP Search
We’ve also made the data table filterable

Member History Search
Notes for developers:
The new Member History system has been designed with interoperability in mind. In IPS Community Suite 4.2 you will be able to integrate your own applications into this system. Member History replaces the display name changes system.

This entry is about our IPS Community Suite 4.2 release.
Social Sign In has long been a feature of the IPS Community Suite but we are always looking for ways to make interaction easier for your visitors. A small but significant improvement we are able to add for 4.2 is to include social sign in links directly at the point where your customers are ready to contribute.
 

Hassle free inline sign in brings your customers right back where they need to be to comment
Visitors are much more likely to comment when the registration process is as fluid as possible and social sign in has fast become a familiar and efficient way of doing so. After signing up via these methods users are logged in and brought right back to where they started ready to comment.
Feedback from our testers has already shown that this change has an immediate effect on the volume of new registrations and we look forward to making it widely available with 4.2.

This entry is about our IPS Community Suite 4.2 release.
IPS Community Suite has long had a reputation system; first we had a simple up/down system, later updated to introduce a Likes system as an alternative. Whichever system you chose to use, it tied in with our reputation system.
We're pleased to introduce the latest updates to the reputation system, and it's something that has been requested for quite some time: Reactions.
Quite simply, reactions allow users to offer more fine-grained sentiments towards content than a simple up/down or 'like'. They are now in common usage on social networks, and so users expect to be able to be more nuanced in their response to something they see.
Let's see how they work in a post, and then cover the options you'll have available.

What you see above is the default setup for a site that has used the Like system in version 4.1. We include 5 reactions by default:
Like Thanks Confused Sad Haha If you currently use the older style up/down reputation system, don't fret - you'll still get the new reactions on upgrade, but they'll be disabled by default and instead the new reaction UI will show up/down reactions. This gives you the flexibility to decide which of the new reactions, if any, you want to allow.
So, those are the basics - but what configuration options can you expect to see? First, you can of course add your own reactions! We expect that beyond the default reactions you'd expect to find, some sites will want reaction types specific to their use-case. On an intranet, you might want to have 'agree' and 'disagree' reactions for staff to use when responding to discussions. On a gaming community, you might replace the icons to be some graphic from a video game that means something to your particular userbase. There's a wealth of possibilities.
Each reaction you set up can be configured to adjust the original author's reputation count - a reaction can be positive (i.e. award a reputation point), negative (i.e. subtract a reputation point), or neutral (i.e. leave the reputation count unchanged). Our default set won't include any negative reactions, but you are free to configure these and new reactions to suit your own use-case. A user's total reputation count is still shown alongside their content and in their profile, of course.
If you don't want to use the new reactions for whatever reason, you can disable all of them except Like, and it'll behave just the like 4.1-and-earlier system:

 
Sites that currently use the up/down system don't show a list of names of users, and instead show an overall reputation score for the content. With the new reaction system, you can enable this even if you don't use up/down reactions. This is great if you plan to use reactions as, for example, an agree/disagree system, or where the content score is more important to your site than the individual reaction types.

How the reaction UI looks with the 'count only' setting enabled
As you'd expect, you can click individual reaction counts (or the overall reputation score, if you enable that setting) to view who reacted to the content. This remains a permission setting that you can apply per-group.

On touch devices, on-hover functionality is not suitable, and so for these devices the reactions UI looks like this:

Reactions play well with all areas of the suite, including Recommended Replies:

...and activity streams...

...and a couple of places we aren't quite ready to reveal yet  
 
We hope you're looking forward to this new feature as much as we are. It's already been a hit on our internal testing site, and we're looking forward to seeing how clients customize it for use on their own community.
Developer note: Reactions are one of two new features (the other currently unannounced) so far that make use of PHP Traits.

This entry is about our IPS Community Suite 4.2 release
I made a quick video to demo things we have already announced for 4.2 so far.
Enjoy  

This entry is about our IPS Community Suite 4.2 release.
Improving your SEO can be a complex undertaking with many different approaches but there are things that everyone knows are good practice and also more modern approaches to SEO that have changed since we first started developing IPS Community Suite. So it was time for a review and update.
Unfortunately no pretty screenshots on this one as this is all behind the scenes stuff but still quite useful to know . Also, some of this may sound a bit technical and dry but feel free to search some of these technologies if you are curious.
Move from HTML structured data to JSON-LD and enhance our existing markup with sensible additions. Calendar, blog, forum and pages (articles) data marked up for rich snippets. General review of our schema.org markup and enhance where appropriate. Use sitelinks search and other sensible markup such as the website and logo markup. Allow administrators to specify social profile links in the AdminCP which we then show links to in the footer and also make available in schema.org markup. Fix many duplicate page title issues. Review and ensure nofollow/noindex tags are used in appropriate areas. Add item tags as HTML meta tags Adding <link rel="next" value="next page url"> helps search engines know next/previous page.  
Nothing like a bulleted list of items to get you excited! But really these should be welcome improvements to all.
 

We are improving our integration options with analytics tracking services to better track and credit all page views. Our focus here was to add the ability for IPS Community Suite to communicate with your analytics tracking provider of choice when it does page change events that do not otherwise get tracked.
Some tracking providers do not understand that an inline AJAX page load (one that loads new content without a full page refresh) should still count as a new page. Even though your browser did not do a full reload, all your content is different so it should count in your metrics.
To solve this issue, IPS Community Suite can now automatically put in custom code to execute on pagination. We include Google Analytics and Piwik code by default and there is also an option to include your own custom pagination event code for other services.

Analytics in AdminCP
If you already have your Google Analytics code in our existing (basic) analytics system then the Suite will detect this on upgrade and automatically enable the new pagination tracking. The screenshot above shows the "Other" option if you do not use Google Analytics or Piwik. If you have other providers you want us to consider just post a feedback topic.
Note: be sure that you embed Google Analytics into your Suite using the built-in analytics system. If you simply pasted the code into your theme templates then we cannot automatically enable the new tracking.
We hope this new feature allows for easier integration with analytics tracking providers and also gives you much better insight into your traffic by properly counting all the page views you may currently be missing out on!
 
This change will be in version 4.1.17 which is scheduled to be released in early December 2016.

Tags are a powerful feature in IPS Community Suite 4 and we have seen clients using them in many ways to enhance content discovery on their site. Adding tags to an item is quite easy but modifying them after the fact requires you to edit the root content item. Not only is this tedious but it also then shows an edited-by line for that item even if all you did was change a tag.
To make this process more user friendly we now have the ability to quickly edit tags when viewing any content item. When you view an item that has tags enabled and you have permission to edit then you will see a link to edit tags.

Tag Quick Edit
That brings up an input box where you can manage your item tags without leaving the page to a full edit screen.

Tag Quick Edit Input
We have been testing the feature for a few weeks internally and it has already saved us time as we tag our discussions. But beyond that, and I think more important, is the fact that we find we are using tags more often. More use means more organization and filter possibilities of your content which is a great thing for busy, data-drive communities.
So we hope that not only will controlling your tags be faster an easier but you too find you use the tagging feature more often with this small but useful change.
 
This change will be in version 4.1.17 which is scheduled to be released in early December 2016.

When a moderator is warning a user they can already input a reason for the warning. However, on busy sites this can get quite tedious plus you also may want some content in there such as your Terms of Service to highlight the member's reason for a warning.
We have added a new default warning note for the warning actions. This allows the admin to setup these notes to pre-populate for the moderator when they select a warning reason. So you might input an admin-approved message, highlight the section of the rules your member violated, or for corporate clients you might include some notice from your legal department.

Admin Configuration
On the front end the moderator will see that content as a pre-filled area in the notes box but the moderator can still edit it to the specific situation.

Moderator Warning Panel
We think this will streamline moderation particularly on busy communities. Admins will be able to define how to approach certain member situations to balance keeping your community running smoothly with the importance of looking professional and polite when you do have to take action on a member. Moderators will also be able to speed up their work by simply clicking a post, selecting a reason, and submitting the warning. No typing needed.
 
This change will be in version 4.1.17 which is scheduled to be released in early December 2016.

There are now two ways to get outbound RSS feeds in IPS Community Suite: Activity Streams and a new Custom RSS Feeds feature we are introducing.
Every Activity Stream you create also creates a related RSS feed. However, Activity Streams take into account recent activity and unread status per-user which you may not want if you want a simple, raw feed of content by date. The new RSS Feeds feature uses similar filter settings to Activity Streams but does a traditional by-date approach to the feed. It also only reports on the initial creation of a content item and does not update based on replies.

Configure RSS Feeds
You can finely select various content settings including selecting just certain categories within an application. So you might create an RSS feed that includes only content from an announcements forum and your blog section which would then be a total feed of all the news on your site.
RSS feeds are useful in the traditional sense for people to subscribe to a feed on your site but they are also useful for integration. Many clients use RSS feeds to pull content into external sources to embed content on a different site, mobile app, or other systems. For those of you looking for even tighter integration with external systems, be sure to check out our REST API.
 
This change will be in version 4.1.17 which is scheduled to be released in early December 2016.

We are changing the existing Profanity Filters feature to become the new Word Filters feature. This change will allow you to define words that will initiate a moderator review before content is posted. With creative use of this new feature you can actually have the Suite self-moderate certain posts.
Right now the Profanity Filters are pretty basic. If you enter "stopword" you can have it change to *****. That's fine for basic profanity but sometimes you want to do other actions with a word. Perhaps someone might mention a competitor, you see common spam words, or you run a site targeted to children and want fine control over what is posted. There are a lot of reasons a simple replace word with *** might not be what you want.
Word Filters introduce an option to let you say "stopword" places a post in moderation queue.

Word Filters
So now you can define a list of words that are not necessarily profanity but are words you want to review if they are posted.
We have also extended this logic to the URL Filters which are now just called Links in the AdminCP configuration. You can now disallow all links and have a post go to approval if someone does post a link. This is also useful for sites where you need really tight control on content either for security or privacy reasons.

Link Options
With the new Links feature you can also set allow/disallow list of allows links and if someone posts a link outside those lists (depending on your mode) the post will go into review.
We hope these features allow you to introduce a bit of automatic moderation to your community and you can come up with creative ways to capture posts that need review either for security, privacy, or just keeping things in order.
 
 This change will be in version 4.1.17 which is scheduled to be released in early December 2016.