Gabriel Torres Posted June 25, 2022 Share Posted June 25, 2022 Hi, We found a potential bug. See the step by step below, see if you can reproduce this incorrect behavior in your install: 1. Add a word in the word filters that will hold a post for manual approval. 2. In an existing topic (not a new one, this is important), add a new post containing the word you configured in (1). 3. The post will be held for manual approval. Go to the forums list, and you will see that instead of the topic/post hold counter showing 0/1, it will show 0/2. I.e., when a post is held for approval, the counter is increasing by two, instead of one. 4. If you delete the post, this counter will decrease by 1. Since it was increased twice, we end up with a 0/1 counter, even though there are not posts held for approval anymore. I've tested this with all third-pary apps and plugins disabled and clearing the cache, at no avail. Thank you in advance! Link to comment Share on other sites More sharing options...
Solution teraßyte Posted June 25, 2022 Solution Share Posted June 25, 2022 It's a known bug fixed for the upcoming 4.7 version: https://invisioncommunity.com/release-notes/ Quote - Fixed an issue where post counts were incremented even when a new item was held for approval via the profanity filters. Gabriel Torres and SeNioR- 1 1 Link to comment Share on other sites More sharing options...
Gabriel Torres Posted June 27, 2022 Author Share Posted June 27, 2022 Thanks for confirming this! 🙂 Link to comment Share on other sites More sharing options...
Gabriel Torres Posted July 5, 2022 Author Share Posted July 5, 2022 @Marc StridgenI've just upgraded to 4.7.0 and the bug is still present here. Please advise. Link to comment Share on other sites More sharing options...
Marc Posted July 5, 2022 Share Posted July 5, 2022 Do you have an example of this so we can take a look for you? Link to comment Share on other sites More sharing options...
Gabriel Torres Posted July 5, 2022 Author Share Posted July 5, 2022 Hi @Marc Stridgen Sure. Scroll down to the Overclock forum at: https://www.clubedohardware.com.br/forums/ See how the counter is 0/2. Click on the "2". You will see that there is only one pending post. I created this posted and the counter jumped straight to "2". See my original post with the full explanation. Note: I cleared all caches, restarted PHP/redis, disabled all apps/plugins, tested with an unmodified, default template. Link to comment Share on other sites More sharing options...
Marc Posted July 5, 2022 Share Posted July 5, 2022 No problem. I have created a ticket for you on this so that we can take a look Gabriel Torres 1 Link to comment Share on other sites More sharing options...
Gabriel Torres Posted July 26, 2022 Author Share Posted July 26, 2022 @Marc Stridgen @Daniel F I sent a reply to your last email on wed 07/21/2022, could you please take a look if you got it, because I didn't get a reply since then, and we are facing deliverability issues with our email server, so I am afraid you didn't get my last response regarding this. Thanks and sorry for having to post this here. Link to comment Share on other sites More sharing options...
Marc Posted July 26, 2022 Share Posted July 26, 2022 This is still open and awaiting development assistance. The last email from yourself was however the day before, so I have just responded to you to make sure we have the latest Link to comment Share on other sites More sharing options...
Gabriel Torres Posted July 26, 2022 Author Share Posted July 26, 2022 Got it, thanks for getting back to me, @Marc Stridgen. I just wanted to double-check since some people haven't received my emails lately. Take your time. Cheers. Link to comment Share on other sites More sharing options...
Marc Posted July 27, 2022 Share Posted July 27, 2022 No problem. 🙂 Gabriel Torres 1 Link to comment Share on other sites More sharing options...
Gabriel Torres Posted September 15, 2022 Author Share Posted September 15, 2022 (edited) @Marc Stridgen I can confirm that this bug is now solved in 4.7.2. Many thanks for the support! 🙂 Edited September 15, 2022 by Gabriel Torres Link to comment Share on other sites More sharing options...
Marc Posted September 15, 2022 Share Posted September 15, 2022 6 hours ago, Gabriel Torres said: @Marc Stridgen I can confirm that this bug is now solved in 4.7.2. Many thanks for the support! 🙂 Fantastic! 🙂 Gabriel Torres 1 Link to comment Share on other sites More sharing options...
Recommended Posts