Classic self-hosted technical help
Problems related to your server or other classic, self-hosted edition issues.
4,348 topics in this forum
-
- 4 replies
- 425 views
Hello How can i clear the values for the ibf_topic_markers older than 2 months? As it seems a bit high with almost 1.800.000 entries? Does that table keep other info than which topic a user had read and which not on ipb 2.3.x? Thank you
Last reply by ASTRAPI, -
- 1 reply
- 453 views
Where do i find the nameservers for the IPBOARD package that i've purchased?
Last reply by shamil, -
- 2 followers
- 11 replies
- 560 views
Hello On my forum i have 1.400.000 posts and increase daily by 5.000 new posts and i want a solution as when i edit any of these is very slow as the table is big. I was thinking to convert the table to Innodb but i am not sure if this is the best solution for the future also.... The read of the table is very fast and the problem is only the edit. The server is powerfull with 16gb ram and 2x quad xeon. Thank you
Last reply by Gary., -
- 4 replies
- 415 views
How much is important to have ECC RAM? I ask that because I was offered a server that uses a good consumer processor (Intel i7-980) with lots of RAM (12 GB) that, of course, is not ECC. :)
Last reply by Gary., -
- 8 replies
- 533 views
Without CDN http://www.webpagetest.org/result/110119_KS_JSG/ With CDN http://www.webpagetest.org/result/110119_FM_JW1/ Any comments, suggestions? Thank you.
Last reply by Jinkler, -
- 2 replies
- 201 views
Hi, Anyone using IP.Nexus with xcache? As we know for IP.Nexus we need Ioncube or Zend Optimizer. A system admin told me that Zend Optimizer and xcache don't play well together. Is that correct? Any suggestions? Thank you.
Last reply by Zhana, -
- 8 replies
- 406 views
I've noticed some gzipped files in there that are months old - are they still required, or can /cache/tmp be flushed once in a while? Cheers, Shaun :D
Last reply by Connor T, -
- 18 replies
- 748 views
Hello, Recently I upgraded to IPB 3.1.4 (sometime in December) and since last July I've been on a VPS. My traffic (last July) was around 6,000-8,000 pageviews per day. Currently I get around 15,000-25,000 pageviews a day, and my traffic is getting higher every day. Board Specs IP.Board v3.1.4 Around 30 mods installed all together (mostly small mods that aren't resource hogs) 100,000 members 300,000 posts Less than 100 forums About 1,000 posts per day Around 1,000 members online daily Average around 100-150+ users active at any time Peak times we get in the 180+ range for active users Late night we drop to around 50 active users Server Specs Dual (x2) Intel Xeon E5…
Last reply by Gary., -
Best Practice for Addresses forums.domain.com
by Guest Danny Michel- 6 replies
- 545 views
so a lot of forums that i frequent use forums.domain.com as a url. what are the benefits of that? how do they do it? do they just setup a sub-domain then re-direct a folder on their server to that url? if so, is it good practice to use a folder called site.com/forums/ then re-direct the url to that folder? if the answer to the above is true, why and how is it that when i try to visit any of the popular forums i visit at sitepoint.com/forums/index.php, digitalpoint.com/forums/index.php or http://www.invisionpower.com/forum/index.php i get a 'page not found'?
Last reply by ørret, -
IPB Keeps Causing Server To Crash
by Guest- 5 replies
- 555 views
For the first few days, when i went live with my IPB + Gallery it was fine but over the past few days we have kept having to reboot the server every 5 hrs as it keeps sending the server offline. we also got someone to look into the database a few days ago when it first happened and they found some corrupt tables, this did seem to sort it out for a day but over the last 48 hrs its sent the server offline 5 times and imo its due to something in either the code or the db, ive looked over the forums and cannot see anyone else with this problem. when its online it runs superb but then just starts to get slower and then wont load at all, goes online and running fine to offl…
Last reply by Gary., -
- 2 replies
- 336 views
Since May this year our server has been struggling... hosting finally sad upgrade... this is a quad 4 gb new machine... My members were complaining daily!! I PM Gary.. and he just cleaned, tweaked, updated and fix.. the server is now better than new :) he saved my community !!! Thanks !!! Dean
Last reply by Gary., -
- 2 followers
- 5 replies
- 378 views
Hello ! :) Regarding XCache, can you tell me if it works better with the highest possible value for xcache.size ? Or should xcache.size be set to a reasonnable value in any case ? I'm asking this because : - I had OOms when xcache.size was set at 64M. So I decided to increase xcache.size up to 96M. - when looking at the administration panel, I notice that there are blue and green bars : but after some time, when the bars are near to be filled, everything is cleared : Is this normal ? Thank you for your help ! :)
Last reply by Gary., -
- 1 reply
- 222 views
Ok so, i use ipb community hosting here (lets call it 'site 1'. but my actual site is a godaddy site (lets call it 'site 2'. how do i get the LOCALHOST at site 1 to point to site 2. so that the community php emails will work. i fear thats why my email system isnt working
Last reply by Gary., -
- 11 replies
- 424 views
Hello I am using xcache and i add also the: $INFO['use_xcache'] = '1'; On the config of the forum. Does that means that it will cache other things than php requests? And my second question is as i want to use memcache for static files and xcache for dynamic which line i must add to the forum config? Please give me some info. And the third question :) Do i have to compile from easy apache update on cpanel the memcache and the memcached? I think memcached is for php.. Memcache will work alone? Thank you
Last reply by Gary., -
- 1 follower
- 9 replies
- 587 views
Does anyone know Linux command, by which I can know total memory usage of a particular process? Example: 14275 xxxxx 20 0 565m 62m 32m S 0 0.8 0:01.10 apache2 14316 xxxxx 20 0 561m 47m 19m S 0 0.6 0:00.28 apache2 14334 xxxxx 20 0 549m 37m 21m S 0 0.5 0:00.16 apache2 14338 xxxxx 20 0 563m 44m 14m S 0 0.6 0:00.54 apache2 14339 xxxxx 20 0 542m 13m 3496 S 0 0.2 0:00.00 apache2 14343 xxxxx 20 0 559m 40m 14m S 0 0.5 0:00.28 apache2 14345 xxxxx 20 0 549m 26m 9m S 0 0.3 0:00.00 apache2 14346 xxxxx 20 0…
Last reply by Gary., -
- 1 reply
- 285 views
Well to me the site is fairly large. Im converting about 30k members millions of posts from a vBulletin 3.8 install to IPB 3.1.4. I just want to make sure the convert goes off without a hitch and if I run into an issue I have someone to offer assistance. Let me know if there is anyone out there and what your rate would be. On a side note I have already done a few conversions with the database but issues always seem to arise when I try want to go live (this is my second forum conversion)
Last reply by NenaDice, -
- 4 replies
- 487 views
Hi, I have a small problem with my forum. I have VPS with parameters: 3GHz and 2GB RAM. Forum generates a big load with a small number of members, yesterday was they around 100, today is it 20 and my VPS don't knead. On VPS works a nginx as a proxy to apache2. Config apache2: http://wklej.org/id/448292/ Config nginx: http://wklej.org/id/448293/ and vhost: http://wklej.org/id/448294/ I add that the all page work good pose homepage
Last reply by GwynBleidD, -
- 4 replies
- 513 views
Hello Can anyone share with me the my.cnf settings from an optimized server with more than 600 users online at the same time on a 16gb ram server? Thank you
Last reply by ASTRAPI, -
- 6 replies
- 230 views
Hello I am using a cpanel server and i use the nginx plugin and nginx in front of apache with prefork. I use : StartServers 8 MinSpareServers 10 MaxSpareServers 10 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 20000 KeepAlive on KeepAliveTimeout 5 MaxKeepAliveRequests 100 TimeOut 300 I use also xcache and spinx :) But i am getting many : /usr/local/apache/bin/httpd -k start -DSSL And the server is loading a lot like 20 and sometimes 200 :( If i have online 350 users per minute.... Any ideas? Thank you
Last reply by Gary., -
- 2 replies
- 485 views
Hi, Anyone here using Xcache? Can anyone please share their configs? Thank you.
Last reply by Connor T, -
- 0 replies
- 175 views
Hello In my forum i have 1.300.000 posts and i want to ask which method is better to use for updates on topics,posts and so on so i do not overhead my db. I am getting about 400 new topics daily and 4.000 new posts. Is it better to use delta updates? Is it better to use RT (real time) indexes? Is it better to set a cron after x minutes? Who can help me please? Thank you
Last reply by ASTRAPI, -
- 2 replies
- 197 views
Hello On my forum v2.3 i have on Apache error logs : Many many of them per second: File does not exist: /home/blabla/public_html/uploads/photo-thumb-3192.jpg, referer: http://www.domain.com/index.php?showtopic=34439 A few: Invalid method in request \x16\x03\x01 And a few also: File does not exist: /usr/local/apache/htdocs/501.shtml Any ideas ? I need at least a way to fix the first one as they are many per second and i never move or delete any images.... Where is showing on the forum as i think is not avatars and maybe are for profile images? From the name photo thumb i think that the forum is resize it maybe? Thank you
Last reply by 3DKiwi, -
- 6 replies
- 426 views
Hello! First of all I made this thread out of curiosity. I have no experience what so ever, and I hope you could help me boost my knowledge a bit :P What are the benefits, and/or disadvantages using SSD for large databases (20+ GB)? If you run a forum on a SSD wouldn't content (posts etc. (not images etc of course)) be displayed much faster (improved speed)? And also, when using the forum search function, wouldn't results display faster? Or am I missing something here? I have read that having DBs on SSD is much more efficient when it comes to repairing/doing changes in the DB and that this on a HDD would take a ridiculous amount of time. I know memory is vital, but let'…
Last reply by Lee Craven, -
- 2 replies
- 301 views
I have the intention to upgrade my server with the new PHP and MySQL scripts, and exactly from PHP 5.2.14 to php 5.3.3 and MySQL from 5.1.44 to MySQL 5.5 I would ask you if some of you had issues with those new version of the scripts, and would go ahead, as I would then install Sphinx and change tables from MyISAM to InnoDB. Your experience?
Last reply by *Salvo*, -
- 1 reply
- 260 views
I've got a forum split between 2 servers. I've installed Sphinx to the database server and set it up as per the instructions. It's generated indexes and such with no problems. Unfortunately the forum doesn't appear to be using it to search for things. It searches members fine but not the forums it just returns no results for terms I know should generate plenty of results. The settings are: Address: IP of database server, port: default, sphinx base path: /var/sphinx as per guide, wildcard searching is off. When starting Sphinx says it's listening on 127.0.0.1:3312 so I'm wondering if that may be implying that it's only receiving connections from localhost, but that…
Last reply by AsterisK,
-
Upcoming Events
No upcoming events found -
Latest Blog Entries
-
