Invision Community 4: SEO, prepare for v5 and dormant account notifications By Matt Monday at 02:04 PM
SecondSight Posted February 21, 2023 Posted February 21, 2023 Hello, 🙂 After upgrading to 4.7.7 today, I noticed that all new posts containing a link were held for moderator approval. I went in the ACP / System / Settings / Posting and disabled Links Filtering option : I had chosen the « Allow any links apart from the links specified » option. Now I use « Allow any link » and it looks like it’s ok. Have you encountered the same problem ? Thank you 🙂 SeNioR- 1
Marc Posted February 21, 2023 Posted February 21, 2023 I havent seen any other reports of this. Are you saying that should have been selected, or it seems to have switched on upgrade?
SecondSight Posted February 21, 2023 Author Posted February 21, 2023 (edited) This happened a few minutes after my community update. 🙂 Edited February 21, 2023 by SecondSight
Marc Posted February 21, 2023 Posted February 21, 2023 Glad you found the issue, and of course check that on your next upgrade. If it switches again, let us know
Nathan Explosion Posted February 21, 2023 Posted February 21, 2023 @Marc Stridgen I think you may want to take a closer look at that setting... Â One additional observation - notice that my valid URL is still a link, while the Google ones are not links?
Marc Posted February 21, 2023 Posted February 21, 2023 These seem to be 2 different issues here. The OP was reporting it was switched on, and shouldnt have been. Whereas thats an issue when it is on. I will take a look at that and report back shortly.
Nathan Explosion Posted February 21, 2023 Posted February 21, 2023 5 minutes ago, Marc Stridgen said: The OP was reporting it was switched on, and shouldnt have been. The OP observed that it was on - but didn't mention whether the setting had any urls added (you can't manually enable it with no URLs added)...if the setting somehow toggled to that value via other means, then I suspect that the above issue I can see would begin occurring.
Marc Posted February 21, 2023 Posted February 21, 2023 33 minutes ago, Nathan Explosion said: The OP observed that it was on - but didn't mention whether the setting had any urls added (you can't manually enable it with no URLs added)...if the setting somehow toggled to that value via other means, then I suspect that the above issue I can see would begin occurring. Good call, yes. Thank you for bringing this issue to our attention! I can confirm this should be further reviewed and I have logged an internal bug report for our development team to investigate and address as necessary, in a future maintenance release.  Nathan Explosion 1
Solution Marc Posted April 4, 2023 Solution Posted April 4, 2023 This issue has been resolved in our recently released 4.7.9 version. Please upgrade if you are seeing this issue, and let us know if you see any further issues.
Recommended Posts