aXenDev

Managing a community as a team makes internal communication an essential part of its successful management.
There are times where you want to leave notes for other staff on specific topics that you're watching. Perhaps a member is close to breaking the rules, or it might be that you want to keep the topic focused and on point so wish to split off-topic posts into a different area.
Whatever the reason, Invision Community 4.5 adds the ability to leave private staff notes on topics.

For some time, Invision Community has had the ability for staff to leave public notes. Now, in 4.5, staff can choose between public and private notes.

This change was made based on customer feedback, so thank you! We do read and listen to all the feedback you leave.
Who is looking forward to Invision Community 4.5? Let us know below!

Installing Invision Community for the first time is a fun and exciting process. After all, you're about to launch a new community that is going to thrive and attract members from all over, and you want to make sure you set it up just right to facilitate a painless experience for your visitors.
If you're new to Invision Community, however, it can be a little daunting when you think about "ok what now?" immediately after installing the software.
Though experience, and researching the analytical data Invision Community installations voluntarily share with us, we identified many common settings that most communities change, and it is easy to see why. In an effort to make Invision Community more approachable to new administrators, we have devised an intuitive "new installation" onboarding process that will help you configure the community just right, and quickly.
Upon first logging in to Invision Community after installing the software, administrators are presented with a welcome screen.

Welcome to your new Invision Community!
You can obviously skip this step by clicking away to another page if you wish, and you won't be bothered again. If you click the "Skip this step" link on the page, you will be sent an email with a link to return to the page in the future should you wish to do so.
Continuing into the helpful wizard, you will be presented with a screen like so

A helpful guided wizard
You'll note that there's an explanation as to why you may wish to configure these settings, as well as guidance for where to find the same options later should you wish.
Upon clicking next, you'll see the previous step marked as completed. You can even skip around steps by clicking and expanding on them should you wish to do so.

Each step is explained in detail
If you reached this page but decide that you have to do something else first, there is a "Remind me later" option at the bottom of the page. Clicking it will allow you to resume whatever else you need to do first, but will helpfully bring you back to this onboarding step at a later time to finish your quick setup.
Finally, once you submit the form you will be presented with a confirmation page containing links to several other areas that you may wish to visit to get started. Things like setting up forums and setting up groups are common tasks, so we've consolidated links to those areas on one helpful screen as part of the new quick setup.

Confirmation that you're doing great so far!
This change is but one small way that we strive to ensure our software is easy to understand and easy to use. The next time you set up a new community, we hope these adjustments make the process smoother for you, allowing you to get the backend work done quickly so you can focus on the real goal - growing your new community.

Zapier is a service that allows you to connect over 2,000 web apps. In Invision Community 4.5 we are launching a beta service of Zapier integration for Invision Community in the Cloud.
What does Zapier do?
Zapier acts as a bridge between Invision Community and other apps, such as Google Docs, Twitter, Facebook, Slack, Trello, Facebook Ads, ActiveCampaign, Zendesk, Asana, Salesforce, Hubspot, Discord, Stripe and more. Zapier has over 2000 apps registered currently, and that number grows every single day.
Let us look at a real life example.
Right now, if you wanted to add a member to a Google Sheets document each time a new registration was completed, you'd need some fairly complex code to be written that was "triggered" by this registration event. This would take days to write at some cost.
Zapier simplifies this by allowing you to connect Invision Community with Google Sheets without needing a single line of code. Zapier allows you to streamline your workflows in minutes.
Zapier has two types of events, triggers and actions.
Triggers
When a certain thing happens on Invision Community, like a member registering or a topic being posted, a trigger can be sent to Zapier to then run actions in other apps. For example, you might create a zaps to...
When a member registers, add their email to a Mailchimp list. When a moderator posts a topic in a news forum, share it on Facebook, Twitter and other social platforms. When a member posts something that requires moderator approval, send a message to a Slack channel for your moderators.
Invision Community Integration with Mailchimp through Zapier
Actions
You can also set up Zaps so that when something happens in an external application, it triggers an action in your Invision Community. For example, you might create a zaps to...
When you add an event in a Google Calendar, create a Calendar Event on your community. When you receive an email to a feedback email address, create a topic on your community in a forum for moderators. When you create a task in Trello, add a record to a Pages Database on your community.
Invision Community Integration with Google Calendar through Zapier
Self-Integration
In addition to using Zapier to integrate with third party services, you can also connect an Invision Community trigger to an Invision Community action. For example: when a member registers, create a topic in a welcome forum.

Self-Integration through Zapier
Frequently Asked Questions
What integrations are available?
In the beta launching with Invision Community 4.5, Zapier will be able receive a trigger when a member account or content (forum post, gallery image, etc.) is created and send actions to create the same. More triggers and actions will be added over time. When will this integration be out of beta?
Later this year. Will third party applications and plugins be able to create Zapier triggers and actions?
Because the integration requires an app hosted with Zapier (which is written in Node.js) and this has to be submitted directly by the vendor, it will be difficult for third party applications and plugins to integrate with Zapier through Invision Community's integration. In the future we may be able to provide basic abstracted integrations for third party applications and plugins through an extension API. In the meantime, third party authors can of course write their own Zapier Apps if desired.

Statistics can help you manage and monitor the direction of your community, giving you valuable insight into how your visitors are interacting with your site and what areas of your community deserve the most of your attention. With the popularity of Clubs in Invision Community, we determined that some statistics aimed at helping administrators review how this feature is being received by their end users was warranted.


Club activity statistics overview
When accessing the "Club Activity" statistics page in the AdminCP, you will be able to quickly see at a glance which club types are the most popular, see which clubs are gaining the most traction with new signups, and see trends in club creations over time. With the signups chart, you can further filter by one or more specific clubs, and save these filter preferences as new tabs on the chart.

See activity across all clubs
The "All Club Activity" tab on this page shows you which types of content (topics, images, files, etc.) are most popular across all clubs as an aggregate. If you find that Calendar or Downloads is especially popular throughout clubs then you may wish to promote these features further. Conversely if you find that a certain type of content is not being leveraged, you may wish to promote it, or retire its functionality on your community.

Activity by club shows you which clubs are most active
You can also view activity per-club, allowing you to identify which of your clubs are the most popular and have the most activity. As with the "Club signups" chart, you can use filters to view just the clubs you are interested in comparing, and save these filters for easy review later on.
 
We hope you find value in these new statistics pages, and that they help you manage the Clubs feature on your site more effectively.

Every single day, your members are searching your community for answers or interesting conversations to join.
Wouldn't it be great if you could learn what is being searched for to identify hot issues, commonly asked questions and discover trends?
We thought so too, which is why Invision Community 4.5 comes with search statistics.
For the first time, Invision Community gathers anonymized information on what your members are searching for so you can use this to highlight more relevant content and shape strategic decisions with your community's structure.

Search statistics help you track searches performed on your community
When a member searches, their identity is converted into a unique key that cannot be reversed to identify the member. This allows us to track a single member's search usage over many search sessions without being able to link it to a specific member account.
The AdminCP now features a dashboard to review the most popular search terms as well as a raw log of recent searches along with the results they returned.
We have a lot of ideas in mind for additional changes down the road with the tracking of popular search terms, but for now, we hope you like the new statistics page and find the information presented useful for your future site plans.

We have come a long way since the late 90s when someone had the genius idea of using a small yellow smiling face image instead of the more common colon-bracket representation of a smiling face.
In Invision Community, there are various places that photography can be used to create visual interest. From uploads in topics, to cover photos for blogs and members.
The humble upload field has served these areas well, but sourcing images to use can be a pain; especially when you have to walk the minefield that is copyright and attribution.
Fortunately, there are a few "CC0" online stock photo libraries that offer quality photography that requires no attribution and are not hampered by copyrights.
One such library is the ever-popular Pixabay, which was established in 2012 and features a very powerful API. Pixabay has over a million images ready to use from llamas to sausages and everything in-between.
Invision Community 4.5 now includes support for Pixabay which brings those images to your fingertips (or mouse pointer if you're on a desktop.)

This video shows the feature in use.
As you can see, not only can you upload into posts from the stock photo library, but you can also use it to add a cover image to your profile and blog entries.
Finding quality photography has never been so easy!
For those that love technical details, the stock photo picker is a programmatic option on the upload form field type making it very easy to add to your own code and apps.
How will you use this new feature? Let me know!

On behalf of the Invision Community staff and company, I'd like to wish our clients and community warm blessings and gratitude for the New Year.  
We're proud to be the community platform of choice for you and your organization over the past year (or decade!), empowering you and your users with the space to debate, discuss, investigate, solve, innovate and celebrate a shared sense of purpose.  The ability to positively touch and connect with the lives of others regardless of location is one of the most transformative benefits of the modern web -- and there's never been a greater demand or need for online communities to connect members in an authentic, branded experience.  
Your community is the gift that keeps on giving, and we're delighted to be a part of it. 
Here's a round-up of the 2019's most visited, most commented, and most clicked-on articles from the Invision Community Blog:
Invision Community managers use tools like Saved Actions and Auto Moderation to work smarter with 5 of the best time saving features Avoid the Engagement Trap, a never-ending race that measures all the wrong metrics in a community The crowd goes wild in the teaser announcement of the forthcoming mobile apps for iOS and Android Go back in a time machine with a Decade in Review - a celebration and testament to the enduring power of community.   Once again, may the magic and wonder of the holiday season stay with you throughout the year!

When the clocks strike midnight on New Year's Eve, we will enter the third decade of producing Invision Community.
A lot has changed since we set up in 2002. Our team has grown and our product matured. In a world where online startups explode and die within a few years, we're something of an anomaly.
We still have the same love and passion for creating the very best tools to build a community, and we have always ensured that Invision Community is in touch with modern demands.
This decade has seen Invision Community go from strength to strength. In 2010 we were one of many forum systems catering to smaller niche audiences. In 2019 we're powering discussion for many international and well-known brands.
Online habits may have changed in this time, and social media may have swallowed up smaller informal communities, but the need for independent community platforms remains strong.
2020 will see us release 4.5 which will bring another round of essential updates to existing features and a fresh batch of new features.
But first, let us climb inside our Delorean, rewind the clock to 2010 and start from the beginning.
As the sun rose on 2010, Bruno Mars was singing about parts of the human face in "Just the way you are", Katy Perry irritated Microsoft Word's spellchecker with "California Gurls", and CeeLo Green was trying to "Forget you" (at least in the radio edit).
Christopher Nolan's boggled all our minds with Inception, James Franco lost the ability to clap in 127 Hours, and Colin Firth stammered his way through The Kings Speech.
Steve Jobs unveiled the iPad to a collective snort, moderate derision and questions over just how useful a giant iPhone will be.
President Obama, just a year into office warns of "Snowmageddon" that eventually dumps up to 40 inches of snow on the east coast of the United States.
We lost comedy legend Leslie Nielsen (we'd never dream of calling him Shirley), and we gained a small child named Ryan who in just nine years would be earning $29,000,000 by opening boxes of toys on YouTube.
62% of us were using Internet Explorer to the chagrin of most web developers who wished that Chrome's 5% market share was more significant.
Facebook celebrated its sixth year by reaching 400 million users (a far cry from the 2.5 billion it currently has). Twitter, just four years old hits 30 million monthly active users (and none of them talked about fake news).
And how about Invision Community?
2010
We hit 2010 running by releasing numerous updates on IP.Board v3.1, including finally using long-established web standards, and share features now that "social networking is all the craze these days" noting that "friends and colleagues often share similar interests, after all."
How innocent we all were in 2010.

IP.Board 3.0
Back then, each product had its own name and release cycle. IP.Gallery's new features included being able to rotate images by 90 degrees. Honestly, people used to go crazy for this stuff.
In May, we released a brand new application called "IP.Commerce". A few months later we renamed it "IP.Nexus" and years later, it was changed back to "Commerce". Naming things is hard.
The announcement contained exquisite details such as "It's hard to say when it'll be available" and "we don't know how much it will cost". We were so sure that it would be accepted positively, we removed the ability to post comments to the blog entry.
As summer turned to autumn and the end of the year loomed large, we released news about a significant update to Gallery called "IP.Gallery 4.0" which pre-dates Invision Community 4 and confused customers for years (so IP.Board 3 works with IP.Gallery 4, but IP.Board 4 works with Gallery 4?). Numbering things is hard too.
The last blog entry was about an app called 'IP.SEO' that I had utterly forgotten existed. It was written by Dan who once locked Lindy out of his own datacenter, but we don't talk about that.

I don't even remember this website
2011
Charles opens the year by managing expectations for IP.Board 3.2 by outlining our three key goals (promotion, usability and modernization). The last one was us removing the "back to top" button and then spending the next eight years explaining why we removed it.
Our spam monitoring service processed 300,000 requests in the first two weeks of 2011. 30% of these requests were deemed to be spam and blocked (0.1% was probably an administrator registering 50 fake accounts before being banned from their own site).
I posted about "exciting new technology" in our new "WYSIWYG" editor (although what you see is sometimes close to what you get) would be more appropriate but slightly less catchy. We spent the next eight years explaining why no one uses BBCode anymore to almost everybody.
Brandon closed out the year with a blog promising "new toys" for IP.Content 2.3 (now called Pages, keep up!) which promises a "who's online" widget and a "shared media field" that was not only complicated to explain, but also use.

IP.Board 3.2 in all its glory
2012
We start the year with news on IP.Board 3.3. This release was to feature essential updates such as the "Remember me?" checkbox on the login form and emoticons in signatures.
Despite being constantly told that we don't take SEO seriously, we round up the latest serious SEO changes including tags, soft 404s and micro schema.
We also celebrated our tenth year in business.
Something terrible must have happened to one of our competitors because we asked if you'd like to switch to IPS.
The year ends with IP.Board 3.4 being released for beta testing. This being a rare year where we release two major versions in less than 12 months.
2013
Brandon has eight coffees and tries to explain what it's like to be a developer: "us developers are a strange bunch. We have a lot of crazy thoughts that just don't make sense to anyone else. Our brains are wired differently. We get from point A to point B by going around point Z and bouncing off point M first.", he closes the blog entry by urging you to ignore us.
The big news is that work on 4.0 is officially underway! Don't get too excited, releasing two major versions in 2012 clearly fatigued us as "IPS Community Suite 4.0" is not released until June 2015, over two years later.
4.0 was our first complete rewrite in years. We threw out all our stable and tested code and started over with an empty editor. It was a vast undertaking that consumed us completely. The result was worth it as we had a new modern framework that still serves us today. But we're getting ahead of ourselves a little.
Back in 2013, Mark talks about trees. Not the kind you find laying around in forests, but rather the programmatic type. It's just a way for Mark to show off how beautiful his code is.
IP.Board 3.4 still gets many updates (along with IP.Gallery, IP.Blog, IP.Content, IP.Downloads and IP.Address (ok that last one was made up)).
We spend the year talking about various new things in 4.0, including a new-new editor and various special features (and no one noticed we started calling it "IPS Social Suite 4.0" - it just rolls off the tongue!)
I introduce the new theme engine for 4.0, and this time, my code is not deleted by Mark (true story).
2014
We didn't know it at the time, but 2014 was not the year that IPS Social Community Suite 4.0 (naming things is hard) will be released. Still, Rikki talks enthusiastically about "extending JS controllers and mixins"  a way of coding so complex, to this day you can count the number of people who truly understand it on one of Rikki's fingers because it's only Rikki that understands it.
Determined not to be outdone in the confusing customers' stakes, I go on about how important it is to convert your database to UTF-8 when upgrading from 3.0.
As 2014 neared its inevitable end, we did manage to put up a pre-release testing site and release Beta 1 a release so unstable; it makes the current political climate look absolutely peachy.

 IPS Community Suite 4.0 (Preview)
2015
Finally, the year that 4.0 is to be released! We released six betas and a few release candidates before nervously hovering over the 'release' button (actually it's a collection of git commands and 'to the letter' instructions I ignore).
After a  year of training customers to call our forthcoming release "IPS Social Suite 4.0," we release it as "IPS Community Suite 4.0". Lindy writes a lengthy blog article that sounds like a cross between a technical discussion of the Brother 8987-A printer and an award acceptance speech.
Quite frankly, after nearly two years of development, we're just relieved to have finally released it.
The year is spent refining and fixing 4.0 and culminates in the news of 4.1, where we add activity streams and a menu manager. We also talk about the new-new-new editor.
December 16th marks the time that IP.Board 3.4 officially dies as we declare it "end of life" and no longer support it. That shiny new release we were excited to talk about in 2012 is finally put out to pasture. The last we heard, IP.Board 3.4 moved to a farm and is doing well.
2016
Now that IP.Board 3.4 is end of life; we do the sensible thing and make a few minor IP.Board 3.4 releases to improve security.
IPS Social.. sorry, Community Suite hits version 4.1.17 (confusing Lindy) before the year is done with many new improvements, including embeds, warning notes and the new leaderboard.
We're still mostly undecided what to call the product, so we avoid trying in all our blog entries.
In fact, looking back, it's quite remarkable how often we changed the name of our product. You'd be forgiven for thinking that it was a robust and well-considered attempt to prevent Google from serving up relevant search results and to confuse potential customers.
We find time to update our own website and introduce a new developer's area.
2017
Barely 16 days into the new year, and we release news of the two-factor authentication feature added to IPS Community Social Invision IP.Board Suite 4.1.18.
When spring has sprung, Charles drops the news that we're working on 4.2, the main feature being a screenshot of the Admin CP log in. We promise that you will love it and that it will be released mid-2017.
Updates come thick and fast. Calendar event reminders, content messages, recommended replies, letter profile photos device management and delayed deletes all make the blog.
Still not convinced that people take us seriously when we say we're committed to SEO, we post about more SEO improvements.
This time, we talk about implementing JSON-LD, rich snippets, pagination tags and more.
We also squeeze another one in about the new-new-new-new editor.
We overhaul our own blog (using Pages because that's how we roll) and I start a hilarious series of blog entries where I troll our own team. Everyone including me loses interest early on in 2019.
During April, we do the sensible thing and change the name of our product once more. IPS Community/Social Suite 4.1 is out, and Invision Community 4.2 is in.
Just to recap: IBForums > IPB > IP.Board > IPS Social Suite > IPS Community Suite > Invision Community.
You're welcome search engines!
As promised, we release Invision Community 4.2 around the middle of the year. Well done, everyone! We finally hit a release date!
As is now tradition, we end the year with news of our next big release Invision Community 4.3 (and tease the new emoji feature). We also calm nerves about Europe's endless fascination with regulation (it's this kind of joke that caused Brexit you know) and wrote up a guide on GDPR.
2018
Phew. We're almost there, dear reader. If you skimmed through most of the blog to this point and expected me to finish with a bang, you'll be disappointed.
We start 2018 at full speed releasing feature news on Invision Community 4.3 including emoji, OAuth, community moderation, REST API, subscription manager, announcements and more.
Oh and we hit our sweet sixteenth birthday in February!
We release Invision Community 4.3 in April to rapturous applause after a short beta testing period. We all agree that 4.3 was a great stable release which instantly makes the developers nervous.
Towards the end of the year, we announce that work has begun on Invision Community 4.4. We talk about new features such as GIPHY integration, AdminCP notifications, Post Before Registering, Commerce Updates and more.
Still not sure if we care about SEO? Well, how about another blog entry on SEO?
The only thing missing this year is a new update on our editor.
2019
And we arrive back home in 2019. A week into January and I pull the massive twist that we're using Invision Community 4.4 on our own community. It's not quite up there with "Bruce Willis is a ghost" though.
In March we write up a case study on The Trevor Space, an LGBTQ charity set up to prevent suicide and to provide crisis intervention. TrevorSpace commends Invision Community for allowing anonymity online which isn't possible with social media.
Rikki drops a bombshell in September when he announces that we're actively working on native iOS and Android apps for Invision Community. Apparently mobile is a thing now.
November starts a series of blog entries talking about our new upcoming release, Invision Community 4.5. We talk about the Admin CP overhaul, Club Pages, RSS Feed Improvements and Club improvements.
And here we are. Right up to date. This decade may have only taken us from IP.Board 3.1 to Invision Community 4.5, but it really has seen a massive change in the company we are, and the industry we are in.
We have seen the inception, rise and stumble of social media. While it's true that forums are no longer the preserve of Star Trek fans obsessing over continuity errors and informal communities have been absorbed by Facebook and friends, spaces that you completely own to host discussions are still very much in demand.

Invision "Chameleon" Community in 2019
Over the past year or so we've seen a sustained rise in the demand for independent communities. Brands especially like that you own your data and can use it to gain insights into customer habits. Just this year, we've launched communities for LEGO, HTC, Sage, Mattel, Gibson Guitars, Squarespace, and many more.
We are constantly evolving Invision Community (assuming we stick with that name) to be at the very centre of your online presence. We have tools to add discussion comments to any page of your site, to embed widgets with a few lines of code. We want to showcase your community throughout your site by adding multiple touchpoints to take your customers on a journey with you. Our native apps will offer new and exciting ways to interact with a community via new interfaces.
As we move into our third decade, I can only see a resurgence for independent communities as we tire of the crushing intrusion of social media. We give away so much of our attention, time and information for very little reward.
We have never been more divisive and fiercely tribal.
It's time to come back together to discuss a topic with care and thoughtfulness. It's time to allow our personalities to take a back seat and let considered discussion live again.
And we'll be here doing what we have always done; creating the very best community platform possible.

I'd love to know when you joined us on this crazy ride. Was it before or after 2010?

Invision Community has supported member referrals via the Commerce app since Commerce was called Nexus all those years ago.
Community owners have been able to see at a glance who is spreading the word and members have received the kudos associated with a growing referral count in return. 
When planning Invision Community 4.5 we saw that this feature had the potential to be so much more… So what have we done to improve it?
See Who Was Referred
In addition to seeing a count of referrals, it’s now possible for both admins and members to see who they referred. If Commerce is enabled admins can also see how much commission (if any) was earned. 

The new referral settings page shows links, code snippets and who you've referred
Member Promotion
Seeing a rising count of who has been referred gives members a great feeling of community involvement but wouldn’t it be great if you could reward your members in other ways too? 
Referral counts now work as a member filter when using the group promotion feature.
You can now automatically promote members that have referred more than a specific number of members to another user group and give them access to exclusive content. This still works alongside paid subscriptions so be another method for members not willing or able to pay for subscriptions to get access.
Integration With Sharing
If the feature is enabled, any time a link is shared via the built-in share links, referrals will be tracked. This occurs automatically without the member needing to think about it. It’s now easier than ever to see who your superfans are and who is bringing new people to the community.
Blocks
As well as the default share links we have added a new sidebar block that can be added anywhere across your community. This prominent call to action can be added on pages you think are most likely to result in recommendations.

The new "Invite a friend" widget
Given that referral capabilities have been expanded into many more areas outside of Commerce we decided that this should now be available as a core feature. Earning commission on sales as a result of referrals will still, of course, require Commerce to be installed.
We hope that these are welcome improvements and they help you encourage more members to participate in your community.

You'd be forgiven for thinking that RSS feeds belong in some bygone era of the web where Netscape was king and getting online meant listening to your modem scream at your phone line.
There's certainly a lot of newer web technologies to share data, but the venerable RSS feed still has a place.
Invision Community has supported RSS feed importing and exporting for a very long time now; however, it has been restricted to just Forums and Blogs.
Importing an RSS feed is a simple way to populate content on your community. It's even a great way to share content to and from your site without creating blocks or writing custom code.
Invision Community 4.5 now centralizes RSS feed importing, so it is available for Forums, Blogs and Pages.

You can now choose to import an RSS feed to any Pages database. Better yet, there is now full support for image enclosures.
RSS feeds have a special tag to note that the feed entry has an attached image. Lots of RSS feeds use this, such as the NASA Image Of The Day feed. Until now, this image has just been silently discarded.

Now, it is imported as an attachment (so it can be moved around in the post or Pages entry). If the Pages database you are importing to has record images enabled, you can optionally import the enclosure as a record image which some template sets can use as a header image, just as our blog here does.

But what about exporting enclosures?
Happily, Invision Community 4.5 can now export the main content image of an item as an enclosure. This certainly makes the Gallery RSS feed export a lot more useful!

While these updates are not revolutionary, they certainly make RSS feed importing and exporting much more useful. We've been asked to support RSS feed importing into Pages for quite a while now.
What do you think of these changes? What will you import into your Pages databases?

Invision Community has come a long way over the past five years.
We've added many new features and invigorated the front-end user experience to keep it current and in-line with modern interfaces.
One area that has remained largely the same is the Admin Control Panel.
When we released Invision Community 4.0 back in 2014, the Admin Control Panel was updated but has stayed relatively dormant since.
But that's all about to change with the upcoming release of Invision Community 4.5!

The Admin Control Panel in 4.5 has received a substantial update, resulting in a modern color scheme and a clean, minimalistic design.
We felt that a lighter, more open design allowed the content more space and to feel less crowded. 
The dark grays have been replaced with shades of blue and aqua which closely reflects Invision Community's new branding, while other colors have been lightened and saturated.
Along with the new color scheme, the overall layout of the ACP has intentionally been kept similar to the existing version, resulting in a design that feels surprisingly familiar yet refreshingly new at the same time.

We hope you've enjoyed this small sneak peek into Invision Community 4.5 and we look forward to introducing you to some more new features in the upcoming weeks!

Do you want to take our latest release for a test drive?

You already are!
We've upgraded our own community for wider testing.
A big focus has been on page speed, so you will notice that our community is significantly faster that it was on 4.3
If you need a recap of what was added, take a look at our product updates blog which takes you through the highlights.
As this is a pre-beta release, expect some funkiness as we scurry around and tidy up our custom theme wrapper and other areas as we spot them.
If you you find a bug, we'd love for you to report it with as much detail as you can muster in the bug report area.
We'd love to know what you think, let us know below.

It's been said that the best place to hide a dead body is on page 2 of Google.
While we can't promise to get you to page 1 for a generic search term, we have taken some time for Invision Community 4.4 to do an SEO sweep.
Moz.com defines SEO as "a marketing discipline focused on growing visibility in organic (non-paid) search engine results. SEO encompasses both the technical and creative elements required to improve rankings, drive traffic, and increase awareness in search engines."
We have the technical skills and were fortunate enough to have Jono Alderson of Yoast lend his time, knowledge and vast experience to improve our SEO.
This blog article gets a little technical. It's completely fine to leave at this point with the comfort of knowing that Google will be a little happier on your site with Invision Community 4.4.
The majority of the changes are designed to send stronger signals to Google and friends over which content to slurp and which to look at a bit later.
Still here? Good. Let us roll up our sleeves and open the hood.

 
Pagination
The most visible change is that we've taken pagination out of query strings and placed it in the path.
For example, the current pagination system looks a little like:
yoursite.com/community/forums/123-forum/?page=3
Which is fine but it gets a little confusing when you add in a bunch of sort filters like so:
yoursite.com/community/forums/123-forum/?sort=asc&field=topic&page=3
A better approach would be to make a clear signal to both Google and humans that pagination is a separate thing.
Invision Community 4.4 does this:
yoursite.com/community/forums/123-forum/page/3/?sort=asc&field=topic
Not only is this good for search engines, but it's also good for the humans too as it is more readable and no longer confused with filter parameters.

Of course, we ensure that the old style pagination is redirected (via a 301 header) to the new pagination URL automatically so nothing breaks.
Canonical Tags
These tags are a way of telling search engines that a specific URL is the 'master copy' of a page. This helps prevent duplicate content from being indexed.
Without it, you are leaving it up to the search engine to choose which is the master copy of the page.
For example:
yoursite.com/community/forums/123-forum/ and yoursite.com/community/forums/123-forum/?sort=desc&field=time may show the same content but have different URLs.
By setting the canonical tag to point to yoursite.com/community/forums/123-forum/ regardless of filters sends a strong signal to the search engines that this is the page you want to be spidered.
Invision Community sets these tags in many places, but we audited these in 4.4 and found a few areas where they were missing.
For example, viewing a member's profile doesn't always set a canonical tag which may confuse search engines when you click on "View Activity" and get a list of content items.
Soft 404s
When an application or website wants to tell the visitor that the page they are looking for doesn't exist, it sends a 404 header code along with a page that says something "We could not find that item" or "No rows available".
If a search engine spiders a page that looks like a 404 page, but it doesn't have the 404 header code, it logs it as a "soft 404".
Given the short amount of time Google has on your site to discover new content, you don't want it to hit many soft 404s.
Invision Community 4.4 omits containers (such as forums, blogs, etc.) that have no content (such as a new forum without any topics yet) from the sitemap, and also adds a 'noindex, follow' meta tag into the HTML source.
Google will periodically check to see if the status of the page has changed and happily slurp away when content has been added.
Other changes
Although the changes listed here don't deserve their own section in this article, they are no less important.
We have audited the new JSON-LD markup added to Invision Community 4.3 to help search engines better understand the relationship between pages.
The "truncate" method that is used to display a snippet of text in areas such as the activity stream now only sends the first 500 characters to the javascript method to reduce page loads and page 'noise'.
The profile view in Invision Community contains a mix of information pertinent to the member and content they've authored.
We've ensured that the content areas are using a specific URL, with appropriate canonical tags. This will help reduce confusion for search engines.
If you made it this far, then well done. It's time to slam the hood closed and mop our collective brows.
These changes will certainly help Google and friends spider your site a little more efficiently and have a clearer idea about what pages and data you want to be indexed which can only improve your ranking.

It might seem a little odd starting a blog on increasing Invision Community's speed with the word "lazy",  but I'll explain why this is a good word for performance shortly.
Earlier this year, Google announced that page speed is a ranking factor.
Simply put, if your site is slow, it will be ranked lower in Google's search results.
It is always a challenge making a large application like Invision Community as efficient as possible per page load. A single Invision Community page can pull in widgets from multiple applications as well as a lot of user-generated content with attachments, movies and images used heavily. 
This is where being lazy helps.
Lazy loading is a method by which attachments, embeds and images are not loaded by default. They are only loaded when the viewer scrolls down enough to make them visible.
This allows the page to load a good deal faster now it doesn't have to load megabytes of images before the page is shown as completely rendered.
I was going to take a fancy video showing it in action, but it's hard to capture as the system loads the media just before you get to it, so it looks fairly seamless, even with sluggish connections.

Not the most dynamic image, but this shows the placeholder retains the size of the image
In addition to image attachments, we have also added this lazy loading to maps and Twitter emoji images.
Improving non-image attachments
Once we had implemented the lazy loading framework, an area we wanted to improve was non-image attachments.
We have listened to a lot of the feedback we had on this area, and have now made it very clear when you add an attachment into a post. We've even returned the download count now it's being loaded on demand.

Using attachments when posting
All the letters
When we first implemented the letter avatars in 4.3, we discussed whether to use CSS styling or use an image.
We decided to go with an image as it was more stable over lots of different devices, including email.
We've revisited this in 4.4, and switched the letter avatars to SVG, which are much faster to render now that the browser doesn't have to load the image files.
Other performance improvements
We've taken a pass at most areas with an eye for performance, here is a list of the most significant items we've improved.
Several converter background tasks have been improved, so they work on less data Duplicate query for fetching clubs was removed in streams Notifications / follower management has been improved Member searches have been sped up (API, ACP live search, member list in ACP, mentions, etc.). Stream performance has been improved UTF8 conversions have been sped up Elasticsearch has been sped up by using pre-compiled queries and parameterisation, as well as the removal of view filtering (and tracking) HTTP/2 support with prefetch/preload has been added Several PHP-level performance improvements have been made Implemented rel=noopener when links open a new window (which improves browser memory management) Several other performance improvements for conversions were implemented that drastically reduce conversion time IP address lookups now fetch IP address details from us en-masse instead of one request per address Cache/data store management has been streamlined and centralised for efficiency Many background tasks and the profile sync functionality have all been improved for performance Brotli compression is now supported automatically if the server supports it Redis encryption can now be disabled if desired, which improves performance Phew, as you can see, we've spent a while tinkering under the hood too.
We'd love to hear your thoughts. Let us know below!
This blog is part of our series introducing new features for Invision Community 4.4.

Do you recall that scene in Harry Potter where young Harry is sitting in his Uncle’s living room when hundreds of letters from Hogwarts burst through the fireplace, filling the room?
Sometimes, when you log into the administrator’s control panel, it can feel a bit like that.
As the administration control panel has evolved, there has been more of a need to display notifications, alerts and warnings to the administrators.
There are several things which may require an administrator's attention which may show a notice on the AdminCP dashboard, a banner on the community, or send an email. For example:
When a new version of Invision Community is released. A new member registers and requires administrator validation. A configuration issue is detected, for example if dangerous PHP functions are enabled on the server. There are items Commerce which require manual action, such as transactions pending manual approval or items to be shipped. Up until now, each such area would manage how these notifications show and are sent independently. In 4.4 we have introduced a new section of the AdminCP which shows all things which require administrator attention in one place, easily accessible from any AdminCP page.

AdminCP Notification Menu
Clicking on any of these notifications will take you to the relevant area of the AdminCP, or there is also a full-screen Notification Center which allows you to quickly take common actions such as approving members.

AdminCP Notification Center
While the best approach is to take the appropriate action (which will automatically dismiss the notification) so you always have an empty Notification Center, most notification types can be hidden, either temporarily on a per-notification basis by clicking the cross in the top-right, or administrators can hide all notifications of a certain type from their individual settings. Administrators can also choose which type of notifications to receive an email notification about.

Notification Settings
Each notification has a severity indicated by the coloured bar on the side and certain notifications can also show banners either across the AdminCP, or also on the front-end (to administrators).
Notifications group automatically (so for example, if there are 5 members pending approval, you will see 1 notification rather than 5 separate ones) and where appropriate each administrator can choose if they want to receive a single email, or a separate email with each occurrence.
Now you won't miss an invitation to Hogwarts, or anything important again.
This is a blog about our upcoming Invision Community 4.4 release, due later this year.

We have a very important announcement to make!
There are times where you need to get the attention of your visitors. You might be closed on certain days of the year, performing server maintenance (if you are consider our Cloud Plans, they're excellent) or running a competition.
Invision Community has always had an announcements feature baked in, but we felt it could be improved.
Okay, maybe this feature isn't as flashy as some of the others we're introducing in 4.3, but these useful features should make managing your community easier.
The new look announcement feature replaces the old widgets enabling you to display customisable announcements in any of the following locations;
Top of the page Above the page content In the sidebar
The three new announcement locations
Each location has some slightly different features; the page top banner is dismissible by the member if they no longer want to see it, whereas the banner above the content and the sidebar announcements cannot be dismissed.
Most of the original customisable features are still available, including the ability to select which applications and pages show certain announcements and which member groups can see them. Combining this with the three new locations gives you much more flexibility for different types of announcements and we've also included the option to customise the color of the announcement.

New customisable options
 
The announcements have also been improved to contain more information. Rather than showing an unformatted snippet along side the title, announcements can now be tapped to open a modal showing any further details.

Modal showing announcement content
We hope you'll enjoy these useful improvements in Invision Community 4.3. Stay tuned for further announcements (pun intended)!