TAMAN Posted May 19, 2018 Author Posted May 19, 2018 (edited) Just now, Josiah Wallingford said: I am a bit confused on how I can use this with my existing blogs. We have lots of blogs and blog posts and I think this would look great but I would also like my readers to see the other view options available. Will this/can this create a new view option for my blogs (that I can then make the default view)? If so, how do I do this? Right now I can't even figure out how to assign this to a block. I am getting a message telling me that a page is not assigned to the template when selecting which template to use. As far as I can tell I have selected the correct database and template on the page I have created. Thought I do not want to really create a new page I just want another viewing option to show on my blogs using this as the viewing option. Hi, This is Pages database template customization and not blogs or any other apps Edited May 19, 2018 by TAMAN
Davyc Posted May 20, 2018 Posted May 20, 2018 12 hours ago, TAMAN said: Blocks are cached, so when you change the block plugin codes it might take time to apply on front-end side If you want the changes to apply immediately then you need to delete the block and re add it ? otherwise wait a couple minutes after you edit the block plugin codes Nope, change this last night and is still the same 8 hours later, have deleted and reissued the articles and still 3 lines showing
TAMAN Posted May 20, 2018 Author Posted May 20, 2018 18 minutes ago, Davyc said: Nope, change this last night and is still the same 8 hours later, have deleted and reissued the articles and still 3 lines showing Then change it directly from the block you created edit the block go to content tab and change it from there
Davyc Posted May 20, 2018 Posted May 20, 2018 1 hour ago, TAMAN said: Then change it directly from the block you created I haven't created any blocks, this is the addon in its base format uploaded as directed. It all works the way it should, but I cannot reduce (or increase, not that I want to) the number of lines (I would have preferred number of characters, but if it's lines then it's lines) I've edited the template that controls the block, as noted above, but to no avail. So, is there anywhere else that needs a change? If I go to blocks in the ACP under pages I only see two listings there Custom and Plugins - there is nothing in them. I've scanned all the other templates (even copied and pasted them into another program to do a thorough search for 'lines' and there is nothing. I'm at a loss - I purchased your Infraskew and Gradient themes and have used the addon from both and they follow the same principles in that the only place that 'lines' appear is in these templates (see image below): I live in hope that this can be resolved lol
TAMAN Posted May 20, 2018 Author Posted May 20, 2018 (edited) Just now, Davyc said: If I go to blocks in the ACP under pages I only see two listings there Custom and Plugins - there is nothing in them. But, you said 38 minutes ago, Davyc said: - I'm using the s1_two_column template in Block Plugin section with this code: how come you dont have any blocks under ACP > Pages > Block? anyway, it makes sense now, you're using the styles as a database template and NOT block plugins templates Change the s1_two_column here ACP -> Pages -> Templates -> Database templates -> s1_two_column -> entry If still doesn't work you can send me a login info with access to pages tab only i can do it for you. Edited May 20, 2018 by TAMAN
Davyc Posted May 20, 2018 Posted May 20, 2018 @TAMAN that sorted it - many thanks. For some reason my search for 'lines' didn't show that up (must get my eyes tested lol). As soon as I changed that line it showed up immediately. Many thanks again for your patience - I can understand how it can be frustrating for you when you want to get to the bottom of an issue.
TAMAN Posted May 20, 2018 Author Posted May 20, 2018 Just now, Davyc said: @TAMAN that sorted it - many thanks. For some reason my search for 'lines' didn't show that up (must get my eyes tested lol). As soon as I changed that line it showed up immediately. Many thanks again for your patience - I can understand how it can be frustrating for you when you want to get to the bottom of an issue. No worries! im glad it is fixed Let me know if i can help on anything else. Have a lovely day ? Davyc 1
MysticStyle Posted May 24, 2018 Posted May 24, 2018 Hello Taman. The thumbnail pictures don't use alt attribute, what fix do you recommend?
TAMAN Posted May 24, 2018 Author Posted May 24, 2018 (edited) Just now, MysticStyle said: Hello Taman. The thumbnail pictures don't use alt attribute, what fix do you recommend? Nothing, you could edit the html and add whatever you want tho Edited May 24, 2018 by TAMAN
Outlaw213 Posted June 5, 2018 Posted June 5, 2018 Any way to add the "Category" badge instead of "Pinned" or "Featured" to say which category the article is posted in, I know where to edit the template file but I don't know the IPS/PHP for it. Also, if there is a conditional statement for checking if it's a certain category? ie {{if $category == reviews }} Thanks
TAMAN Posted June 5, 2018 Author Posted June 5, 2018 Just now, Outlaw213 said: Any way to add the "Category" badge instead of "Pinned" or "Featured" to say which category the article is posted in, I know where to edit the template file but I don't know the IPS/PHP for it. Also, if there is a conditional statement for checking if it's a certain category? ie {{if $category == reviews }} Thanks {$record->container()->_title} Outlaw213 1
TAMAN Posted February 28, 2019 Author Posted February 28, 2019 VERSION -2.0.4: Support for IPS 4.4.x How to update? You only need to delete the old templates and then re-Upload it again. If you don't know how, then please view the Updates section in the documentation file 🙂 cybertech 1
ntrivilino@alice.it Posted March 2, 2019 Posted March 2, 2019 help me please @TAMAN when i try to open an article i receive this message NOTE: i have update the template Sorry, there is a problem Something went wrong. Please try again. Error code: EX0 TECHNICAL DETAILS Error: Call to a member function url() on boolean (0) #0 /home/i125w7do/public_html/applications/cms/modules/front/database/record.php(310): IPS\Theme\class_cms_database_m03_01_19_s1_two_column->record(Object(IPS\cms\Records1), '\n<div data-cont...', NULL, true) #1 /home/i125w7do/public_html/system/Dispatcher/Controller.php(96): IPS\cms\modules\front\database\_record->manage() #2 /home/i125w7do/public_html/system/Content/Controller.php(50): IPS\Dispatcher\_Controller->execute() #3 /home/i125w7do/public_html/applications/cms/sources/Databases/Dispatcher.php(347): IPS\Content\_Controller->execute() #4 /home/i125w7do/public_html/applications/cms/widgets/Database.php(128): IPS\cms\Databases\_Dispatcher->run() #5 /home/i125w7do/public_html/applications/cms/sources/Pages/Page.php(1281): IPS\cms\widgets\_Database->render() #6 /home/i125w7do/public_html/applications/cms/sources/Pages/Page.php(2210): IPS\cms\Pages\_Page->getWidgets() #7 /home/i125w7do/public_html/applications/cms/modules/front/pages/page.php(112): IPS\cms\Pages\_Page->output() #8 /home/i125w7do/public_html/applications/cms/modules/front/pages/page.php(43): IPS\cms\modules\front\pages\_page->view() #9 /home/i125w7do/public_html/system/Dispatcher/Controller.php(96): IPS\cms\modules\front\pages\_page->manage() #10 /home/i125w7do/public_html/applications/cms/modules/front/pages/page.php(33): IPS\Dispatcher\_Controller->execute() #11 /home/i125w7do/public_html/system/Dispatcher/Dispatcher.php(152): IPS\cms\modules\front\pages\_page->execute() #12 /home/i125w7do/public_html/index.php(13): IPS\_Dispatcher->run() #13 {main}
cybertech Posted March 2, 2019 Posted March 2, 2019 Updated with no problem, had to remove the templates and re-upload.
TAMAN Posted March 2, 2019 Author Posted March 2, 2019 (edited) 12 hours ago, ntrivilino@alice.it said: help me please @TAMAN when i try to open an article i receive this message Hello, You need to update download the latest version in marketplace and check the documentation file on how to update Edited March 2, 2019 by TAMAN
ntrivilino@alice.it Posted March 2, 2019 Posted March 2, 2019 (edited) After update, i just selected the S1 two column and i have tested: if you hare logged in the article don't appear, look error if you visit the site like guest (not logged) the article work and appear correctly! solution please? thanks Edited March 2, 2019 by ntrivilino@alice.it
EmpireKicking Posted March 2, 2019 Posted March 2, 2019 @ntrivilino@alice.it Check your permissions that you setup for each members groups
TAMAN Posted March 2, 2019 Author Posted March 2, 2019 2 minutes ago, ntrivilino@alice.it said: the permissions are ok ;-( I will check it out for you later 🙂
TAMAN Posted March 2, 2019 Author Posted March 2, 2019 Version 2.0.5 VERSION -2.0.5: Support for IPS 4.4.x. Fixed a bug when the records throw an error if the database reviews option is enabled. VERSION -2.0.5: Deleted unused templates from the Display Groups Template & Listing Groups Template. VERSION -2.0.5: Display Groups Template has now only one template S1 Display records. How to update? You only need to delete the old templates and then re-Upload it again. If you don't know how, then please view the Updates section in the documentation file 🙂 cybertech 1
ufshane Posted March 25, 2019 Posted March 25, 2019 Did the update properly, all of the views work until I actually go to an article itself then I get an error... any ideas?
Recommended Posts