@Stuart Silvester

Whelp... I just tried to do an edit to a post and it did not shift. I dunno, it was doing it yesterday immediately after upgrading. All's well, I guess. Sorry for the false alarm.

2 hours ago, Stuart Silvester said:

We've released a patch to address some issues.

#6538 Fix broken commerce product forms
#6549 Restore mobile navigation bar on tablets
#6551 Fix issues with saving custom badges
#6556 Fix an issue where debug log checks failed during install

I just tried to run the patch in Support and got this.

Patch worked fine for me, thanks @Stuart Silvester. 👌

Nice to see the bottom navigation bar working correctly again on iPad.

1 hour ago, bearback said:

Nice to see the bottom navigation bar working correctly again on iPad.

Weirdly I've just had a user mention that the menu option on the bottom right is missing on their iPad!

1 hour ago, abetts said:

Weirdly I've just had a user mention that the menu option on the bottom right is missing on their iPad!

Great timing!

16 hours ago, Square Wheels said:

I just tried to run the patch in Support and got this.

Can you send me a DM letting me know which site this is?

3 hours ago, Stuart Silvester said:

Can you send me a DM letting me know which site this is?

It was on squarewheelscycling.com.

I ran it again last night, and it processed fine.

7 hours ago, abetts said:

Weirdly I've just had a user mention that the menu option on the bottom right is missing on their iPad!

it was or was very small icons you could hardly see but fine now.

On 2/3/2026 at 12:27 PM, Moestuin said:

Is this part removed in 5.0.15?

As the content is missing on my test install, and on 5.0.14 the options are still there?

This is a bug - I've submitted a fix for this.

Just updated. Thought I’d make you aware, mid installation a poorly timed Cloudflare oi are you human, tick this box for us page appeared.

Installation went through fine after, on a stripped down layout, which felt a lot slower than usual once it realised I’m not one of those Elon Musk robots.

Ok, it hasn’t gone through as smooth as I thought. After completing the update, the homepage still shows the update available message.

Admin panel under applications says I’m on 5.0.14 with an update available. I go to update again and the installer page says I have no applications to update.

Cleared cache and it still says update available under the Get Support page.

1 hour ago, Day. said:

Ok, it hasn’t gone through as smooth as I thought. After completing the update, the homepage still shows the update available message.

Admin panel under applications says I’m on 5.0.14 with an update available. I go to update again and the installer page says I have no applications to update.

Cleared cache and it still says update available under the Get Support page.

Sorry to see you were having issues. I've completed that off for you.

[Bug Report]

1. Turning on Quick Translating in Translation Tools would cause blank page;

2. 'Comments' in Gallery Statistics has no localized string.

8 hours ago, sychn said:

Turning on Quick Translating in Translation Tools would cause blank page;

I'm unable to reproduce this. Quick translation is working as expected for me. A white page can mean a server-side issue is occurring. You should check your server logs.

8 hours ago, sychn said:

'Comments' in Gallery Statistics has no localized string.

Which statistics are you referring to? If it's the front-end block/widget, the key you're looking for is stats_total_comments_v

As always Thank you for all the help and support we get for our forum.

Sadly our all round knowledge isn't great but we can get by, the original owner changed jobs so we took it on

One question I am puzzled about, I have read about V5 being released for well over a year now, but my forum is still on version 4.7.23.

Should "we" be doing something to push through the upgrade to V5, or is it a case of being in a queue for it to be rolled out?

Additionally, do we "have to" upgrade to V5, my concern is we may have to relearn things and potentially our current add ons may be lost

Apologies if this is something very obvious but I am a bit lost as to what to do

8 minutes ago, Phantom_OTIB said:

As always Thank you for all the help and support we get for our forum.

Sadly our all round knowledge isn't great but we can get by, the original owner changed jobs so we took it on

One question I am puzzled about, I have read about V5 being released for well over a year now, but my forum is still on version 4.7.23.

Should "we" be doing something to push through the upgrade to V5, or is it a case of being in a queue for it to be rolled out?

Additionally, do we "have to" upgrade to V5, my concern is we may have to relearn things and potentially our current add ons may be lost

Apologies if this is something very obvious but I am a bit lost as to what to do

There is no immediate action required. If you'd like to remain on v4, you can. Although at some point upgrading will be required since V4 will no longer be supported, again - at some point.

What you can do is check which applications you're running and if they've been converted/made available to V5. You can find most v5 applications here: https://invision-market.com/

If they aren't, then you can reach out to the developer if there's plans to make them available to v5 - Or find a new developer if they aren't around anymore. Worst case scenario, cut your loss and upgrade.

V5 is a major improvement from V4, so worth considering doing the upgrade sooner rather than later. The community here is always willing to help with any questions or issues you may have. 🙂

1 minute ago, Cedric V said:

There is no immediate action required. If you'd like to remain on v4, you can. Although at some point upgrading will be required since V4 will no longer be supported, again - at some point.

What you can do is check which applications you're running and if they've been converted/made available to V5. You can find most v5 applications here: https://invision-market.com/

If they aren't, then you can reach out to the developer if there's plans to make them available to v5 - Or find a new developer if they aren't around anymore. Worst case scenario, cut your loss and upgrade.

V5 is a major improvement from V4, so worth considering doing the upgrade sooner rather than later. The community here is always willing to help with any questions or issues you may have. 🙂

Thank you, I will have a look at the list

Silly question, how do I go about installing V5?

3 minutes ago, Phantom_OTIB said:

Thank you, I will have a look at the list

Silly question, how do I go about installing V5?

As a Cloud customer, you can go to Client Area -> Manage Purchases -> click your package -> scroll down to "Request version 5 upgrade" and the system will apply the files for you. Then you will want to go to /admin/upgrade.

16 hours ago, Jim M said:

As a Cloud customer, you can go to Client Area -> Manage Purchases -> click your package -> scroll down to "Request version 5 upgrade" and the system will apply the files for you. Then you will want to go to /admin/upgrade.

Sorry to keep on, I can't seem to find that area.

This is the options we have

10 minutes ago, Phantom_OTIB said:

Sorry to keep on, I can't seem to find that area.

This is the options we have

This is the page Jim was referring to: https://invisioncommunity.com/clientarea/

On 2/12/2026 at 10:03 PM, Stuart Silvester said:

I'm unable to reproduce this. Quick translation is working as expected for me. A white page can mean a server-side issue is occurring. You should check your server logs.

It was not a completed white page, there is a '2026' string on the top left corner after turn on the "Quick Translation".

Edited March 2Mar 2 by sychn

12 minutes ago, sychn said:

It was not a completed white page, there is a '2026' string on the top left corner after turn on the "Quick Translation".

I might find the problem. I add a current year scripts copyright line.

<script>document.write(new Date().getFullYear());</script>

Then I can not use the quick translation.

Is it a bug?