Durango Posted June 10, 2015 Share Posted June 10, 2015 HiSorry if the answer has been given recently but i just wanted to know if IPB 4 Converter was ready or not ?we have many PUNBB 1.3.4 to convert to IPB and many other people on the forums tooSo is the converter ready ?Tx ! Link to comment Share on other sites More sharing options...
diablo76 Posted June 10, 2015 Share Posted June 10, 2015 Hi Charlie,speaking from my own research - and now experience - I would suggest a different approach.As far as I know, the IPB4 Converter will not be nearly as good as the IPB3 Converter for quite a while.What you can do - and it works very well - is install an IPB3 board temporarily, convert your old board into this IPB3 installation and then perform an upgrade to IPB4. If you follow all steps necessary for upgrading from version 3 to 4, it works very well. Link to comment Share on other sites More sharing options...
Durango Posted June 10, 2015 Author Share Posted June 10, 2015 Hi DiabloTx for your helpSo you mean IPB4 converter is not ready yet ? Link to comment Share on other sites More sharing options...
diablo76 Posted June 10, 2015 Share Posted June 10, 2015 Hi Charlie,as far as I know, there is no IPB4 Converter yet - and it will still be a while. Link to comment Share on other sites More sharing options...
Durango Posted June 10, 2015 Author Share Posted June 10, 2015 Ok then thank you we will do as you advised Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.